Sub-Zero 427 Sub-Zero Design Guide - Page 76
Flush Inset Panel, Flush Inset Panel Specifications - wine storage
View all Sub-Zero 427 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
Wine Storage 76 Model WS-30 FLUSH INSET PANEL Overlay model WS-30 used in a flush inset application allows the decorative panel to cover the door trim for a seamless appearance. The most common way to achieve this look is to work with three panels-the decorative flush inset panel, which is typically 3/4" (19), a .10" (3) spacer panel and a 1/4" (6) backer panel. Depending on your cabinet manufacturer, this could be one panel routed for different dimensions. The illustrations below will give you a better idea of the panel construction and how it interacts with our frame. The size of the flush inset panel is critical, it must fit over the door frame. IMPORTANT NOTE: Do not cover the glass door with a solid panel. The inside edges of the rough opening as well as the sides and a portion of the back side of the decorative panels will need to be finished, as they will be exposed when the doors are open. The window cut-out edges of the overlay, spacer and backer panels will also need to be finished. IMPORTANT NOTE: For flush inset panels thicker than 3/4" (19), a 90° door stop may be required to prevent interference with adjacent cabinets. Flush Inset Panel Requirements MODEL WS-30 Max Panel Weight Min Panel Thickness 75 lbs (34 kg) 5/8" (16) FLUSH INSET PANEL SPECIFICATIONS H A A A H A W WS-30 Flush Inset DOOR Flush Inset Panel Spacer Panel Backer Panel GRILLE Flush Inset Panel Spacer Panel Backer Panel WINDOW Cut-Out Location W 31" (787) 291/8" (740) 293/4" (756) H 693/4" (1772) 6815/16" (1751) 699/16" (1767) W 31" (787) 291/8" (740) 293/4" (756) H 91/4" (235) 85/16" (211) 815/16" (227) W 231/2" (597) H 621/4" (1581) A 33/4" (95) Grille panel dimensions listed are for a standard 84" (2134) overall height of the unit. For an 83" (2108) overall height, subtract 1" (25) from grille panel height dimensions. For an 88" (2235) overall height, add 4" (102) to height dimensions. SPACER PANEL FLUSH INSET PANEL BACKER PANEL TRIM FLUSH INSET PANEL SPACER PANEL BACKER PANEL Do not exceed flush inset panel dimensions, as this could cause damage to panels and the Sub-Zero unit. 9/16" (14) 5/16" (8) min Panel assembly cross section. 3/4" (19) .10" (3) 1/4" (6) typical Panel assembly rear view.