Sub-Zero 611 Built-In Use and Care Guide - Page 21

Cleaning, Built-in - parts

Page 21 highlights

S U B - Z E R O B U I LT- I N U S E & C A R E CLEANING STAINLESS STEEL EXTERIOR Classic and platinum stainless steel finishes: To clean the exterior of the classic and platinum stainless steel finishes, use a soft, nonabrasive stainless steel cleaner like Signature Polish and apply with a soft 100% lint-free cloth. Signature Polish is available from Signature Limited Laboratory, P. O. Box 13436, Dayton, Ohio 45413-0436, or 877-376-5474 (toll free). Carbon stainless steel finish: Carbon stainless steel can be cleaned with mild soap and water. The carbon stainless steel finish uses the interest of brushed steel to bring out the maximum metallic luster of its charcoal background. Different light types and source locations can result in variations in shading on different components and areas of large appliances. These variations are normal with the carbon finish and add to the unique character of colored stainless steel. To bring out the natural luster of all three finishes, lightly wipe the surface with a waterdampened microfiber cloth followed by a dry polishing chamois. All work should follow the grain direction of the finish. Better results are obtained by keeping the cloth in continuous contact with the stainless steel. INTERIOR CLEANING To clean interior surfaces and removable parts, wash with a mild solution of soap and lukewarm water with a little baking soda. Do not use vinegar. Rinse and dry thoroughly. Avoid getting water on lights, Control Center and display panel. S I GNATU RE POLISH Do not submerge or pour hot water over cold glass shelves. GLASSWELL CLEANING To clean the glasswell of Models 685 and 695, use a mild solution of soap and water with a little baking soda. Wipe up spills after removing the dispenser water grille. For the stainless steel areas of the glasswell on Models 685 and 695, you may use the Stainless Steel Exterior cleaning procedure. Signature Polish is available from Signature Limited Laboratory, P. O. Box 13436, Dayton, Ohio 45413-0436, or call 877-376-5474 (toll free). Under no circumstances should you use a metallic or highly abrasive cleaner or cloth, as this will remove the carbon finish or scratch the classic or platinum finishes. 21

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40

CLEANING
STAINLESS STEEL EXTERIOR
Classic and platinum stainless steel
finishes:
To clean the exterior of the classic
and platinum stainless steel finishes, use a
soft, nonabrasive stainless steel cleaner like
Signature Polish and apply with a soft 100%
lint-free cloth.
Signature Polish is available from Signature
Limited Laboratory, P.O. Box 13436, Dayton,
Ohio 45413-0436, or 877-376-5474 (toll free).
Carbon stainless steel finish:
Carbon
stainless steel can be cleaned with mild soap
and water.
The carbon stainless steel finish uses the
interest of brushed steel to bring out the
maximum metallic luster of its charcoal back-
ground.
Different light types and source locations can
result in variations in shading on different
components and areas of large appliances.
These variations are normal with the carbon
finish and add to the unique character of
colored stainless steel.
To bring out the natural luster of all three
finishes, lightly wipe the surface with a water-
dampened microfiber cloth followed by a dry
polishing chamois. All work should follow the
grain direction of the finish. Better results are
obtained by keeping the cloth in continuous
contact with the stainless steel.
21
INTERIOR CLEANING
To clean interior surfaces and removable parts,
wash with a mild solution of soap and luke-
warm water with a little baking soda. Do not
use vinegar. Rinse and dry thoroughly. Avoid
getting water on lights, Control Center and
display panel.
GLASSWELL CLEANING
To clean the glasswell of Models 685 and 695,
use a mild solution of soap and water with a
little baking soda. Wipe up spills after
removing the dispenser water grille.
For the stainless steel areas of the glasswell on
Models 685 and 695, you may use the Stain-
less Steel Exterior cleaning procedure.
Under no circumstances should you use
a metallic or highly abrasive cleaner or
cloth, as this will remove the carbon
finish or scratch the classic or platinum
finishes.
Do not submerge or pour hot water over
cold glass shelves.
SUB-ZERO
BUILT-IN
USE & CARE
SIGNATURE
POLISH
Signature Polish
is available from
Signature Limited
Laboratory,
P. O. Box 13436,
Dayton, Ohio
45413-0436, or
call 877-376-5474
(toll free).