Sub-Zero 632 Built-In Use and Care Guide - Page 12

S U B - Z E R O B U I LT- I N U S E & C A R E ELECTRONIC CONTROL SYSTEM The Electronic Control System of your Sub-Zero Built-In unit monitors and accurately displays temperatures within one degree of your preset temperature. It also monitors operation of the unit and lets you know if there's a problem. You'll find the Control Center located in the refrigerator section of all models, except Model 601F where it is in the freezer section. Refer to the illustrations below. TEMPERATURE CONTROL Your new refrigerator / freezer was thoroughly inspected and tested before it was shipped from the Sub-Zero factory. Temperatures are preset at 38˚F (3˚C) in the refrigerator section and 0˚F (-18˚C) in the freezer section. For combination units, there are two sets of WARMER and COLDER key pads on the Control Center, one for the refrigerator section and the other for the freezer section. Models 601R, 601RG and 601F have only one set of WARMER and COLDER key pads. To adjust the temperature in either section, depress the WARMER or COLDER key pads on the Control Center. The temperature ranges are -5˚F (-21˚C) to +5˚F (-15˚C) in the freezer section, and 34˚F (1˚C) to 45˚F (7˚C) in the refrigerator section. It is normal for temperatures to fluctuate slightly, depending on external influences such as an open door, the degree of humidity and room temperature. IMPORTANT NOTE: Always allow 24 hours for the refrigerator to reach the temperature you set. FREEZER COLDER WARMER COLDER WARMER REFRIGERATOR ICE ON/OFF ON/OFF UNIT ON/OFF Ice On/Off 632 Freezer Control Refrigerator Control Bell On/Off Unit On/Off Freezer Control REFRIGERATOR COLDER WARMER FREEZER Ice COLDER On/Off WARMER ICE ON/OFF ON/OFF UNIT Unit ON/OFF BULK ICE On/Off DISPENSER Refrigerator Control Bell On/Off Bulk Ice Dispenser Electronic Control Center Electronic Control Center - Models 685 and 695 12