Sub-Zero IC-30FI Integrated Design Guide - Page 8
Custom Panels
View all Sub-Zero IC-30FI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
INTEGRATED REFRIGERATION Custom Panels For integrated models, custom door panels and handle hardware must be provided. Refer to the panel requirements chart and typical panel dimensions. The thickness of the custom panel can vary. A minimum 5/8" (16) thick panel is required, but the thickness can be increased provided it does not exceed the weight limit. The depth of each integrated model is 24" (610). Allow for panel thickness when planning the finished opening depth. Refer to the full-scale template on page 11. CAUTION As reveals between cabinetry and the unit decrease, severe finger pinching can occur while door is closing. Finish all sides of custom panels. They will be visible when the door/drawer is open. D-style handles are recommended. Door handles must be located near the edge of the panel opposite the hinge and should be centered top to bottom. Drawer handles must be located near the top edge of each panel. Stainless steel tubular and pro handles are available through an authorized Sub-Zero dealer. For local dealer information, visit the find a showroom section of our website, subzero.com. PANEL REQUIREMENTS PANEL WEIGHT 18" Column 24" Column 30" Column 36" Column PANEL WEIGHT 30" Tall (door) 36" Tall (door) Drawer PANEL THICKNESS All Panels MAX 45 lb (20 kg) 60 lb (27 kg) 75 lb (34 kg) 75 lb (34 kg) MAX 50 lb (22 kg) 60 lb (27 kg) 15 lb (7 kg) MIN 5/8" (16) TYPICAL PANEL DIMENSIONS 797/8" (2029) 493/8" (1254) W Column W Tall 13 9/16" (345) 1611/16" (424) W Drawer Typical panel dimensions are based on an 84" (2134) finished height for column and tall models and 341/2" (876) for drawer models, with a 4" (102) toe kick and 1/8" (3) reveals. Panel dimensions must be adjusted accordingly for all other installations. Refer to the illustration for panel heights and the chart below for panel widths. PANEL WIDTH MODEL 18" Model 24" Model 27" Model 30" Model 36" Model W 173/4" (451) 233/4" (603) 263/4" (679) 293/4" (756) 353/4" (908) DUAL INSTALLATION For dual installations, refer to the illustration for panel heights and the chart below for panel widths. PANEL WIDTH MODEL 18" Model 24" Model 27" Model 30" Model 36" Model W 1713/16" (452) 2313/16" (605) 2613/16" (681) 2913/16" (757) 3513/16" (910) 8 | Sub-Zero Customer Care 800.222.7820