Sub-Zero UC-24C Undercounter Installation Guide - Page 9

Undercounter Installation 9 subzero.com/specs Door Panel MODELS UC-24R AND UC-24C(I) Models UC-24R and UC-24C(I) can be fitted with a custom overlay or stainless steel door front panel. A stainless steel door panel with tubular or pro handle is available as a sales accessory. Installation of the stainless steel panel will be required. For the overlay application, a decorative door panel and handle hardware must be provided. Refer to the chart for panel specifications. You can match your handle hardware with surrounding cabinetry or use a Sub-Zero accessory handle. Handles must be attached directly to the overlay panel. BEVERAGE CENTER MODEL UC-24BG Stainless steel model UC-24BG/S is shipped from the factory with the stainless steel door panel and tubular or pro handle in place. No panel installation is required. For overlay model UC-24BG/O, a decorative frame door panel must be provided to surround the glass. The inside edges of the panel that will be visible through the glass must be finished. Refer to the chart for panel specifications. You may also use your own handle hardware to match surrounding cabinetry. If you do not use the pre-drilled holes on the door of the unit, you will need to attach the handle directly to the overlay panel. IMPORTANT NOTE: For installations at or above 5,000' (1524 m) in altitude, a special high altitude glass door unit must be ordered. Panel Specifications OVERLAY PANEL UC-24R, UC-24BG, UC-24C(I) RAILS AND STILES UC-24BG MAX PANEL WEIGHT UC-24R and UC-24C(I) UC-24BG MIN PANEL THICKNESS Overlay Panels W 233/4" (603) H 301/16" (764) W 21/4" (57) min 20 lbs (9 kg) 10 lbs (5 kg) 5/8" (16) OUTDOOR MODEL UC-24RO Model UC-24RO is shipped from the factory with the stainless steel door panel and tubular or pro handle in place. No panel installation is required. IMPORTANT NOTE: Model UC-24RO must be built into cabinetry and cannot be used in a freestanding application. A solid panel must not be installed over the glass door, as this may cause moisture to form behind the panel.