Sub-Zero UC-24C Undercounter Use & Care Guide - Page 10

Undercounter Use & Care 10 Freezer Storage MODEL UC-24CI Model UC-24CI refrigerator/freezer features an automatic ice maker with clear ice container. The ice container is removed by pulling it straight out. Reinstall using the reverse process. ICE MAKER OPERATION The ice maker of model UC-24CI is fully automatic and has been tested at the factory. The level of ice in the ice container is controlled by an ice level arm. When the container is filled with ice, the ice level arm senses the level and shuts off the ice maker. As ice is used, the level drops and the ice level arm signals the ice maker to restore ice production. To shut off the ice maker, lift the ice level arm up or to the off position. ICE PRODUCTION The ice maker is designed to produce enough ice for normal family use. The timing of ice making cycles will vary depending on load conditions, door openings and room temperature. On average, you can expect a cycle of ice (eight cubes per cycle) every two hours until the container is full. The ice maker operates on water pressure of 20 psi (1.4 bar) to 100 psi (6.9 bar). In some cases, a reverse osmosis water filter system may not be able to maintain the minimum pressure. Dispose of the first bucket of ice produced by your new unit to ensure that pipe residue or other particles associated with new water lines are not consumed. IMPORTANT NOTE: If ice is not used regularly it tends to fuse together. To avoid this, empty and replace the ice in the container as needed.