Sunbeam FPSBSM2102 User Manual - Page 8
Reparing
View all Sunbeam FPSBSM2102 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Preparing the Stand Mixer for Use Before preparing the mixer for use, be sure the speed control dial is in the OFF position and the electric cord is unplugged. Be sure to wash bowls and attachments before initial use. Raising and Lowering the Mixing Head Press the tilt release button, located at the top of the neck of the Stand Mixer. While the button is depressed, hold the handle and ease the head of the Stand Mixer back. The head will lock into this tilt position (See Figure 2). To lower the mixing head, press the tilt release button. While the button is depressed, hold the handle and ease the head of the Stand Mixer down. A "click" sound will indicate when the mixer head has locked into position. (See Figure 1) Installing the Attachments Beaters and Dough Hooks Select the pair of attachments best suited for your mixing job. (See Mixing Guide for recommendations). Take the attachment that has a green colored band around the top and insert into the mixer head, indicated by the matching green dot. When attachments are inserted properly the one with the green band should be nearest side of the bowl. Note: Be sure both attachments click firmly in place. You may need to twist the beater attachment slightly to engage it in position prior to pushing it in place. English-7