Sunbeam Manual User Manual - Page 3

Lid latch Holds the donut maker closed to make 5 fun donuts with a hole. LEARNING ABOUT YOUR Donut maker Power / Bake Ready Indicators Indicates that the donut maker is on and heating. HOW TO USE 1. Insert the plug into a 120 volt power outlet. 2. Allow your donut maker to pre-heat until the 'BAKE READY' light comes on. This indicates that the cooking plates have reached the correct temperature for cooking. 3. For best results, lightly spray the cooking plates with a cooking oil spray before using. This will assist in the removal of the donuts after cooking. 4. Divide mixture into pan holes as per recipes using a spoon, fabric piping bag or pitcher. NOTE: Do not use disposable plastic piping bags as these may melt if they come into contact with hot plates. Surfaces are HOT. 5. Gently close the lid, ensuring the latch locks into place. Do not slam the lid down as it may cause the mixture to run off the cooking plates. 6. Allow to cook for approximately 6 minutes or until golden. 7. To remove donuts, always use a plastic or wooden spatula. Never use a sharp object or metal, as this will damage the non-stick surface of the cooking plates. Non-stick coating Non-stick plates for easy cleaning. Donut holes Create 5 delicious donuts in minutes. -4- -5-