Symphonic DSC313B Owner's Manual - Page 18
Playback
View all Symphonic DSC313B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
PLAYBACK This TV/VCR will operate with any cassette that has the mark. For best results, we recommend the use of high-quality tapes. Do not us poor quality or damaged tapes. INSERTING A CASSETTE Insert the cassette in the direction as shown. Push in gently, but continuously, on the center-back of the cassette until it is drawn into the TV/VCR. The TV/VCR will automatically turn on. Window CORRECT WRONG AUTO REPEAT PLAYBACK The TV/VCR has the auto repeat function that allows you to repeat a tape indefinitely without touching the PLAY button. ALL REPEAT: Repeat playback from the beginning to the end of the tape. BLANK REPEAT: Repeat playback from the begin- ning to a blank part, which is blank for more than 10 seconds. PRECAUTIONS • Avoid moisture. Moisture condensation may occur on the tape if it is moved from a cold place to a warm place or visa versa. Before using a tape with these conditions, to avoid damage of the tape and your TV/VCR, wait until the tape has warmed to room temperature and the moisture has evaporated. • Avoid extreme heat, high humidity and magnetic fields. • Do not tamper with the cassette mechanism. • Do not touch the tape with your fingers. NORMAL PLAYBACK Make sure ... • TV/VCR power must be turned on. 1 Insert a prerecorded tape If the erase-protection tab has been removed, the TV/VCR will start playback automatically. 2 To begin playback PLAY B Press the PLAY button. Note: If any menu is activated on the screen, the PLAY button does not function. Press the MENU but- ton to clear the menu. then, press the PLAY button. If a tape is already on the TV/VCR with power off, A) Press the PLAY button on the TV/VCR. Power will automatically turn on and playback will start. (Direct button operation) B) Use the remote control; Press the POWER button to turn the TV/VCR on, and then press the PLAY button on the remote con- trol. 3 To stop playback STOP Press the STOP button when play- back is completed. 1 Select "USER'S SET UP" Press the MENU button on the remote control. Press the PLAY/K or STOP/L button to point to "USER'S SET UP". Then, press the F.FWD/B button. - M E N U - TIMER PROGRAMMING PICTURE CONTROL SETTING CLOCK CHANNEL SET UP B USER'S SET UP V-CHIP SET UP LANGUAGE [ENGLISH] CAPTION [OFF] ZERO RETURN TIME SEARCH 2 Select "ALL" or "BLANK" Press the PLAY/K or STOP/L but- - USER'S SET UP - ton to point to "REPEAT PLAY". Press the F.FWD/B or REW/s RENTAL B REPEAT PLAY AUTO RETURN [OFF] [ALL] [OFF] button repeatedly until your desired selection [ALL] or [BLANK] appears. 3 Exit the Repeat Play setting Press the MENU button on the remote control to return to the TV mode. 4 Start playback Press the PLAY button to start the Repeat Play. "REPEAT PLAY B" appears. • Once you select the Repeat Play mode, it stays in effect even after you turn off the TV/VCR. • If the Rental mode is set [ON], the "RENTAL PLAY B" display has priority. TO CANCEL THE REPEAT PLAY MODE Repeat steps [1] and [2], select [OFF] using the F.FWD/B or REW/s button on the remote control. Press the MENU button on the remote control to return to TV mode. If there is a power failure of any kind, the unit will retain its memory for this feature. - 18 - EN 0B19