Symphonic SE436G Owner's Manual - Page 17

PLAYBACK N0 RMA a AY13ACK PICTURE SEARCH Make sure ... • Turn on the TV and set the TV channel to the same video output channel as located on the back of the VCR. (CH 3 or 4) • Press TVNCR button so that the TVNCR indicator on the VCR comes on. 1 Insert a prerecorded tape Counter mode appears at counter 0:00:00 on the TV screen. If the erase-protection tab has been removed, the VCR will start playback automatically. This feature is useful in finding or skipping over a particular scene on a tape. In this mode, the sound will be muted. 1) You may view a video tape at a high speed in either a forward or reverse direction by pressing F.FWD or REW button. (in the SP / LP / SLP modes) 2) Depress it again, the VCR will now search in super high speed. (in the LP / SLP modes only) 3) Press PLAY button to return to normal speed. 2 To begin playback PLAY.. Press PLAY button. STILL PICTURE You can view a still picture on the screen during playback (the Still mode). Press PAUSE/STILL button during playback. Press PLAY button to return to playback. NOTES: NOTE: If any menu is activated on the TV screen, the PLAY button on the remote control does not function. Press MENU button to clear the menu. Then, press PLAY button. If a tape is already in the VCR with power off • You can advance the picture by one frame by pressing the PAUSE/STILL button repeatedly during the still mode. • If it is left in the Still mode for more than five minutes, the VCR will automatically switch to the Stop mode. 2A) Using button on the VCR Just press PLAY button on the VCR. Power will automatically turn on and playback will start. (Direct Button Operation) 2B) Using button on the remote control Press POWER button to turn on, and then press PLAY button on the remote control. 3 To stop playback VERTICAL HOLD CONTROL When the picture begins to vibrate vertically, stabilize the picture by pressing CHANNEL for • button in the Still mode. NOTES: • When the picture is distorted or rolling vertically, ad- just vertical hold control on your TV. Press STOP button. • Some newer TV's do not have a user adjustable vertical hold control. - 17- EN 6K15