Symphonic SL2840 Owner's Manual - Page 19
Special, Playback
View all Symphonic SL2840 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
SPECIAL PLAYBACK • Use the remote control for the following procedure. • The POWER and the VCR/TV indicator must be on the VCR. • Turn on the TV and set the TV to channel 3 or 4. Now set the CH3/CH4 switch on the back of the VCR to match the channel selected on the TV. 4-4 CH3 CH4 [Back of the VCR] AUTO REPEAT PLAYBACK RENTAL PLAYBACK The VCR has the auto repeat function that allows you to repeat a tape indefinitely without touching the PLAY button. Make sure to insert a prerecorded tape. This function enables you to improve the picture quality when playing back worn cassettes such as rented tapes. • Selecting ON or OFF must be done during playback. Select "VCR SET UP" Press the MENU button until the VCR SET UP menu appears. VCR SET UP SATELLITE LIM< -> AUTO REPEAT RENTAL AUTO RETURN 2 Select "AUTO REPEAT" Press the PLAY/A or STOP/V button to point to "AUTO REPEAT". 3 Begin Auto repeat playback Press the F.FWD/10- button so that [ON] will appear next to "AUTO REPEAT" on the TV screen. When in Stop mode, Repeat playback mode will start automatically. If the on-screen menu still remains, press the RESET/EXIT button to exit the menu. Insert rental tape into VCR Begin playback. =OM. 2 Select "VCR SET UP" Press the MENU button until the VCR SET UP menu appears. '1CP SET LP SATELLITE UNK AUTO REPEAT RENTAL AUTO RETURN 3 Select "RENTAL" Press the PLAY/A or STOP/V button to point to "RENTAL". 4 Select "RENTAL" to [ON] Press the F.FWD/I/0- button so that "RENTAL ON" appears. • Once you select the Auto Repeat mode, it stays in effect even after you turn off the VCR. • The COUNTER MEMORY button does not function if the Auto Repeat mode is set to [ON]. In this case, set the Auto Repeat mode to [OFF). • To stop playback, press the STOP button. • Once you select the Rental mode, it stays in effect even after you turn off the VCR. • To stop playback, press the STOP button. TO EXIT THE RENTAL PLAY MODE Repeat steps [1] to [3], and press the F.FVVD/10- button so that "RENTAL OFF" appears. TO EXIT THE AUTO REPEAT MODE Repeat steps [1) to [2], and press the F.FWD/10- button. [ON] will then disappear from the menu. Then, press the RESET/EXIT button to return to TV mode. Power failure: If there is a power failure for more than 30 second, Auto Repeat Playback will go to off. Power failure: If there is a power failure for more than 30 second, Rental Playback will go to off. - 19 - EN 7K01