Synology SA3400 Hardware Installation Guide - Page 4
Synology SA3400 at a Glance, Before You Start - default password
![]() |
View all Synology SA3400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
Synology SA3400 at a Glance No. Article Name Location Description 1 Power Button and Indicator 1. Press to power on your Synology NAS. 2. To power off the Synology NAS, press and hold until you hear a beep sound and the Power LED starts blinking. 2 Status Indicator Displays the status of the system. For more information, see "LED Indicator Table." 3 Alert Indicator Front Displays warnings regarding fan or temperature. For more information, see "LED Indicator Table." 4 Beep Off Button Press to deactivate the beeping sound that is emitted when a malfunction occurs. 5 Drive Status Indicator Displays the status of drives. For more information, see "LED Indicator Table." 6 Drive Tray Install drives (hard disk drives or solid state drives) here. 7 Rail Kit Release Tab Push in and hold to release the Synology NAS from the rail kit lock.1 8 Power Port Connect power cords here. 9 PSU Indicator and Beep Off Button 1. Displays the status of the power supply unit (PSU). For more information, see "LED Indicator Table." 2. Press to deactivate the beeping sound that is emitted when a malfunction occurs. 10 PSU Fan Disposes of excess heat and cools the PSU. 11 Console Port This port is used for manufacturing use only. 12 PCI Express Expansion Slot Supports additional PCIe network interface cards. 13 SAS OUT Port Back Connect to Synology Expansion Unit2 here. 14 1GbE LAN Port Connect RJ-45 network cables here. 15 10GBase-T LAN Port Connect RJ-45 network cables here. 16 USB 3.0 Port 17 RESET Button Connect external drives, USB printers, or other USB devices to the Synology NAS here. 1. Press and hold until you hear a beep sound to restore the default IP address, DNS server, and password for the admin account. 2. Press and hold until you hear a beep sound, then press and hold again until you hear three beep sounds to return the Synology NAS to "Not Installed" status so that DiskStation Manager (DSM) can be reinstalled. 1 For more information about the rail kit installation, please refer to the Quick Installation Guide that comes with the rail kit. 2 For more information about Synology Expansion Unit supported by your Synology NAS, please visit www.synology.com. 4 Chapter 1: Before You Start
![](/manual_guide/products/synology-sa3400-hardware-installation-guide-432dce3/4.png)