TASCAM CD-RW4U Owners Manual - Page 17

3 - Playback operations-Programmed order playback 1 To start playback at tracks 1 through 9, simply press the appropriate key (1 through 9). 2 To play a track whose number is higher than 9, press the +10 key an appropriate number of times to set the "tens" digit of the track Playback modes The unit can be set to play back the whole disc in the order in which it was created, the tracks of the disc in a random (shuffled) order, or a programmed order (see "Programmed order playback" on page 17). NOTE Selecting the playback mode is only possible using the remote control unit. It is not possible to select the playback mode using the main unit alone. 1 Press the PLAY MODE key B repeatedly to cycle the display through the following: • Program (see "Programmed order playback" on page 17 below). The red PROGRAM display indicator lights in this mode. Programmed order playback The CD-RW4U can play up to 25 tracks in a pre-programmed order as described here. Setting the programmed order The steps to the specified order are as follows: 1 Press the PLAY MODE key B until the dis- play shows Program. The display changes to show 0Tr 0:00 00, meaning that no program steps have yet had tracks assigned to them. 2 Use the number keys to enter a track number (including the +10 key to enter values greater than 9, as described in "Track search" on page 16). There is no need to press ENTER. The track entered is assigned to the program step, and the display changes, showing the track number, the total time of the program so far, and the step number, e.g. 2Tr14:56 03. number, followed by a single key to set the "units" digit. For example: Track 13 = +10, 3 Track 30 = +10, +10, +10, 0 On the remote control unit only, the SEARCH keys Hcan be used to "fast-forward" and "fast-rewind" through the disc. • Shuffle (random track order). In this mode, each track is played once before the disc repeats. Using the track search functions will move backwards or forwards through the random order, e.g. if track 7 is followed by track 10, it is possible to use the track search keys to go back to track 7, which is remembered as being before immediately before track 10. The red SHUFFLE display indicator lights in this mode. • Continue. Normal playback mode. Programming is cancelled, and playback continues in the normal order. The selected mode is shown in large characters and disappears from the display a few seconds after selecting the mode, when the display returns to its previous mode. 3 Enter the next program step. NOTE Steps 3 and 4 above can be carried out from the main unit by turning and pushing the MULTI DIAL control B. 4 Repeat steps 3 and 4 above until the program is complete. 5 Press the PLAY/PAUSE 6 or PLAY key L to start playback at the first program step. The display shows the track, the current time display, and the program step number. While in programmed playback mode, using the SKIP keys I or the MULTI DIAL control B moves backwards and forwards in the order set in the program. TASCAM CD-RW4U 17