TASCAM DA-302 Owners Manual - Page 10

11

Section 4 : Features and Controls

0

ID-related display

Shows the indication for the deck selected by the

SELECT 1/2 key.

START WRT:

Lights when the Start ID Manual Writing mode is

selected.

START ERASE:

Lights when Start ID erasing is selected.

SKIP WRT:

Lights when Skip ID writing is selected.

SKIP ERASE:

Lights when Skip ID erasing is selected.

END WRT:

Lights when End ID writing is selected.

RENUM:

Lights when renumbering is selected.

START:

Lights when the Start ID is detected.

SKIP:

Lights when the Skip ID is detected.

END:

Lights when the End ID is detected.

q

Sampling frequency display

…

When an analog signal is being recorded, the sam-

pling frequency (48.0k, 44.1k, 32.0k) selected by

the Fs switch is lit.

…

When a digital signal is being recorded, the sam-

pling frequency (48.0k, 44.1k, 32.0k) of the input

signal is lit.

·

When "DIGITAL" is selected with the INPUT

switch and recording is performed without dig-

ital signal input, 48.0k blinks.

…

LP lights in the Long Play mode.

w

Peak level meter

…

Shows

the

input

signal

level

during

recording/record-pause/sampling monitor.

…

The playback signal level is shown during play-

back.

…

When the input or playback signal level surpasses

the full-scale level, the OVER section lights.

e

Time-related display

ABS:

Lights when the ABS time is shown on the time

display.

PGM:

Lights when the PGM time is shown on the time

display.

REMAIN:

Lights when the REMAIN time is shown on the

time display.

r

Repeat display

Shows the indication for the deck selected by the

SELECT 1/2 key.

REPEAT:

Lights in the One-Program Repeat mode.

ALL REPEAT:

Lights in the All-Program Repeat mode.

8

COMMON MODE switch

1 & 2:

Select to engage both Deck 1 and Deck 2 in the

Record or Play mode at the same time.

1

∑

2:

Continuous playback or recording on Deck 1 and

Deck 2.

OFF:

For independent operation of Deck 1 and Deck 2.

9

Fs switch

…

When recording analog input signals, select the

sampling frequency (32k, 44.1k, 48k).

·

When 32k is selected, the Long Play mode is

engaged.

·

When recording digital input signals, the sam-

pling frequency is automatically determined

according to the input signals.

0

MARGIN RESET key

…

Resets the margin value when pressed while the

margin value is shown in the program number/mar-

gin display.

·

When holding this key pressed, the margin value

corresponding to each input signal is shown con-

tinuously.

…

Shows the margin value for as long as it is pressed,

when pressed while the program number is shown

in the program number/margin display during play-

back.

q

INPUT level controls

Use to adjust the recording level.

w

SELECT 1/2 key

To select the control deck for Deck 1 and Deck 2 (ID

MODE key, EXECUTE key).

When setting the menu, use to select the deck as

required.

e

ANALOG INPUT switch

Set this switch when input signals are analog.

UNCAL:

To adjust the recording level with the INPUT level

controls.

CAL:

The input and output levels are fixed and the record-

ing level cannot be adjusted.

·

For the specified input level, the level meter shows

-16 dB.

r

INPUT switch

Set this switch according to input signals.

ANALOG:

Select when input signals are analog.

DIGITAL:

Select when input signals are digital.

TASCAM DA-302 Owners Manual - Page 10

Features and Controls

Page 10 highlights