TASCAM DA-6400 Release Note IF-MA64/EX IF-MA64/BN - Page 1

IF-MA64/EX & IF-MA64/BN Release Notes Latest information Always use the most recent firmware version for this unit. For information about the latest firmware, visit the TEAC Global Site (http://teac-global.com/). Maintenance items Fixes in Ver002B • When MADI COAXIAL input was selected, noise would be input in the following conditions. This has been fixed. • When no cable was connected to the MADI COAXIAL input connector • When the device connected to the MADI COAXIAL input connector was not turned on • Operation stability has been improved. Checking the firmware version Before starting firmware update procedures, check the firmware version of the IF-MA64/EX and IF-MA64/BN you are using. 1. Turn the main unit on. 2. Select the VERSION INFO item on the SYSTEM SETUP menu page to open the VERSION INFORMATION screen. 3. On this screen, you can check the information about the cards loaded in SLOT 1 and SLOT 2. Updating is not necessary if the SLOT 1 and SLOT 2 shown here are the same or newer than those of the firmware version you intend to use for the update. NOTE For details, see "Checking the firmware version" in "11 - Other Settings, Information Screens and Keyboard Operations" of the DA-6400/DA-6400dp Owner's Manual. D01298820A 1 TASCAM IF-MA64/EX & IF-MA64/BN