TASCAM DM-24 Downloads v. 2.10 Release Notes - Page 3

New features in DM-24 version 2.1 Busses as effect input sources Busses 1-8 can now be used as input sources for the internal effects on the PATCH page. This can be convenient if all aux sends are already being used for other purposes. New features in HUI The HUI page has changed considerably and new functions have been added. As only channel strips 1-8 are functional in HUI mode, the keys on channel strips 9-16 have been mapped to perform specific functions. • Pressing the SHIFT soft key icon allows you to use the faders as aux send level controls for the chosen Bug fixes In addition to the features listed above, the DM-24 version 2.1 firmware release addresses all known bugs. send. Pressing this soft key again returns the faders to fader control of the DAW. • MUTE keys 11-12 act as left bank and right bank keys. These banks operate in 8-channel increments. • SEL keys 11-12 act as left and right channel advance keys. This is similar to the bank keys, but these keys only "move" by one channel at a time. • REC key 11 recalls the EDIT screen in Pro Tools, while REC key 12 recalls the MIX screen in Pro Tools. • SEL 14 and SEL 16 make the waveform shorter and longer (time axis) respectively. • Pressing the SEL 15 key activates ZOOM. REC 15 key and MUTE 15 key make the waveform larger and smaller respectively. • MUTE key 10 selects the POD controls as pan controls. • REC key 9 selects SEND A, REC key 10 selects SEND B, SEL key 9 selects SEND C, SEL key 10 selects SEND D, and MUTE 9 selects SEND E. All of these functions are laid out clearly on the HUI page as shown here. TASCAM DM-24 Version 2.1 Release Notes 3