Home » TASCAM Manuals » Audio Mixers » TASCAM DP-24SD » Manual Viewer

TASCAM DP-24SD Owners Manual - Page 54

Calling effects from the guitar effect library, Saving guitar effects in the library, Send effects

Add to My Manuals
Save this manual to your list of manuals

Page 54 highlights

9 - Using Built-In Effects Calling effects from the guitar effect library 1. On the Guitar Effect screen, press the F2 (LIBRARY) button to display the library list. 2. Use the JOG/DATA dial to select the effect setting that you want to call, and then press the F4 (t) button. 3. The setting is called and the display returns to the Guitar Effect screen. Press the F1 (g) button to return to the Guitar Effect screen without changing the parameter. NOTE The preset data is stored in PRESET, and the user settings are stored in USER. Saving guitar effects in the library You can save an edited setting as a user setting in the library. 1. When the Guitar Effect screen is displayed, press the F2 (LIBRARY) button to display the PRESET/USER library list. Use the JOG/DATA dial to select the USER area, and then press the F3 (SAVE) button. NOTE The library list contains a PRESET area and a USER area. PRESET area data cannot be overwritten. 2. Enter a name, if necessary. Names of the PRESET library cannot be changed. Send effects The send effects can be used to send signals to Send Effect 1. You can select one among the 3 types of send effects (REVERB, DELAY, CHORUS) available. You cannot use multiple types of effects simultaneously. Using send effects You can send input channel or track signals to the send effects. Channel signal send levels and pre/post selection are performed on the Mixer screen. (See "Sending signals to internal/external effects" on page 38.) The return from this effect is sent to the stereo bus. In Bounce mode, however, it is sent to the bounce bus. (See "Bouncing tracks" on page 43.) Editing send effects The parameter editing is performed on the EFFECT screen. Press the EFFECT button to open the EFFECT screen, and while the Guitar Effect is displayed, press the F1 (SEND) button to switch to the Send Effect screen. Press the F3 (SELECT) button to select the effect type (REVERB, DELAY, CHORUS). Use the CURSOR (5/b/g/t) buttons to select the parameter that you want to change, and then use the JOG/ DATA dial to select the value. Calling the send effect library 1. On the Send Effect screen, press the F2 (LIBRARY) button to display the library list. 2. Use the JOG/DATA dial to select the effect setting that you want to call, and then press the F4 (t) button. 3. The setting is called and the display returns to the Send Effect screen. Press the F1 (g) button to return to the Send Effect screen without changing the parameter. Saving send effects in the library You can save an edited setting as a user setting in the library. 1. When the Send Effect screen is displayed, press the F2 (LIBRARY) button to display the PRESET/USER library list. Use the JOG/DATA dial to select the USER area, and then press the F3 (SAVE) button. NOTE The library list contains a PRESET area and a USER area. PRESET area data cannot be overwritten. 2. Enter a name if necessary. Names of the PRESET library cannot be changed. 54 TASCAM DP-24SD

Section	Page
1 – Introduction	8
Features	8
Items included with the product	8
Conventions used in this manual	8
Trademarks	9
Precautions for placement and use	9
Beware of condensation	9
Cleaning the unit	9
About SD cards	9
Precautions for use	9
Using the TEAC Global Site	9
Product registration	9
About TASCAM customer support service	9
2 - Quick Guide	10
Playback and mixing	10
Preparation	10
Listening to the demo song	10
Recording and mastering	11
Creating a new song	12
Connecting and setting the input sources	12
Setting the guitar as the recording source for TRACK 1	13
Adjusting and monitoring the input level	13
Recording a guitar to TRACK 1	13
Playing back the recording	14
Recording a guitar to TRACK 2	14
Recording a vocal to TRACK 3	15
Mixing the tracks	16
Mastering a recording	16
Shutting down	18
3 – Names and Functions of Parts	19
Top panel	19
Front panel	22
Rear panel	23
Home screen	23
Menu structure	24
Screen operations	25
4 – Preparation	26
Inserting and removing SD cards	26
Inserting an SD card	26
Removing the card	26
About write-protected SD cards	26
Powering the unit	26
Changing the outlet plug	26
Start-up & Shutdown	27
Starting up the unit	27
Shutting down	27
Setting the date and time	27
Preparing an SD card for use	28
Recorder modes	28
Connecting other equipment	28
Front panel	28
Rear panel	29
Adjusting the contrast	29
5 - Song Management	30
Editing names	30
Loading a song	30
Creating a new song	31
Saving a song	31
Viewing song information	32
Copying songs	32
Erasing songs	32
Protecting songs	33
Deleting unnecessary audio data from a song	33
Changing a song name	34
6 - Basic Recording	35
Selecting the input sources	35
Assigning inputs	35
Assigning to a mono track	35
Assigning to a stereo track	35
Assigning to a stereo bus	35
Checking the assignment	35
Canceling an assignment	35
Using phantom power	36
Monitoring	36
Monitor selection	36
OL indicators and level meters	36
Peak hold display	37
Setting the Mixer screen	37
Using the input equalizer	37
DIGITAL TRIM setting (Track only)	38
Sending signals to internal/external effects	38
Enabling insert effects	38
Setting the stereo position	38
Changing the signal phase	38
Checking the fader level	39
Solo	39
Muting tracks	39
Rehearsing the recording	39
Making the first recording	39
Multitrack recording	40
Setting the tracks for recording	40
Setting track pan and level	40
Input selection and assignment	40
Setting input levels	40
Recording	40
Undoing an operation	40
Undo feature settings	40
Undoing the last operation (single undo)	41
Undoing older operations (multiple undo)	41
7 - Recorder Functions	42
Punching in and out	42
Using a foot switch to punch in/out	42
Setting the foot switch	42
Bouncing tracks	43
Performing the track bouncing	43
Checking the result	43
Direct Location Function	43
Locating directly a specified time	44
Locating directly a specified measure/beat	44
Location marks	44
Setting a location mark	44
Skipping to location marks	44
Deleting a location mark	44
Returning to zero or the last recording position	44
Fast forwarding and rewinding	45
Cueing with the JOG/DATA dial	45
Jogging while viewing a waveform	45
Jogging while listening to audio	45
Repeat playback	45
Setting IN/OUT points	45
Using repeat playback	46
Jumpback playback	46
Checking cueing points (preview)	46
Automatic punching in and out	46
Setting punch-in/out points	47
Checking punch-in/out points	47
Rehearsing with automatic punching	47
Recording with automatic punching	48
Checking a take	48
Virtual tracks	48
Recording to virtual tracks	48
Assigning virtual tracks	48
8 - Track Editing	49
Overview of track editing	49
Editing points	49
Basic editing procedures	49
Explanation of items	49
COPY/PASTE	50
COPY/INSERT	50
MOVE/PASTE	51
MOVE/INSERT	51
OPEN (Insert Silence)	51
CUT (Remove Part)	51
SILENCE (Erase Part)	52
CLONE TRACK (Track Duplication)	52
CLEAN OUT (Delete Track)	52
9 - Using Built-In Effects	53
Dynamic effects	53
Inserting a dynamic effect	53
Editing a dynamic effect	53
Guitar effects	53
Inserting a guitar effect	53
Editing guitar effects	53
Calling effects from the guitar effect library	54
Saving guitar effects in the library	54
Send effects	54
Using send effects	54
Editing send effects	54
Calling the send effect library	54
Saving send effects in the library	54
10 - Mixing Down and Mastering Tracks	55
Mixing down tracks	55
Levels and balance	55
Fader group	55
Stereo position (panning)	55
Track equalizer	55
Send effects	56
Creating a master file	56
Setting the start and end points	56
Creating a master file	57
Exiting Mixdown mode	57
Checking the master file	57
Ending master file checking	57
Finishing up a master file (mastering)	58
Mastering procedures	58
Using the mastering equalizer	59
Using mastering compression	59
Using normalize	60
Exiting Mastering mode	60
11 - Various Other Functions	61
Metronome	61
Tuner function	62
Setup (PREFERENCE)	62
Setting automatic power saving	63
Setting automatic monitoring	63
Setting the song name format	63
Restoring the initial preference settings	63
Viewing information	64
12 - SD Card Management	65
Quick formatting an SD card	65
Full formatting an SD card	66
13 - Exchanging Data with a Computer	67
Operating system requirements	67
Connecting to a computer	67
Disconnecting	68
Track import and export	68
Importing tracks	68
Exporting tracks	69
Deleting files from the AudioDepot folder	70
14 – Troubleshooting	71
15 – Messages	72
General messages	72
16 – Specifications	75
Ratings	75
Input/output ratings	75
Analog audio input/output ratings	75
Control input/output ratings	75
Audio performance	75
Operating requirements	75
General	76
Dimensional drawings	76
Block diagram	77

Match case Limit results 1 per page

TASCAM DP-24SD

9 - Using Built-In Effects

Calling effects from the guitar effect library

On the Guitar Effect screen, press the

(

LIBRARY

)

button to display the library list.

Use the

JOG/DATA

dial to select the effect setting that you

want to call, and then press the

(

) button.

The setting is called and the display returns to the Guitar

Effect screen.

Press the

F1 (

)

button to return to the Guitar Effect screen

without changing the parameter.

NOTE

The preset data is stored in

PRESET

, and the user settings

are stored in

USER

Saving guitar effects in the library

You can save an edited setting as a user setting in the library.

When the Guitar Effect screen is displayed, press the

(

LIBRARY

) button to display the PRESET/USER library list.

Use the

JOG/DATA

dial to select the USER area, and then

press the

F3 (

SAVE

)

button.

NOTE

The library list contains a PRESET area and a USER area.

PRESET area data cannot be overwritten.

Enter a name, if necessary.

Names of the PRESET library cannot be changed.

Send effects

The send effects can be used to send signals to Send Effect 1.

You can select one among the 3 types of send effects (REVERB,

DELAY, CHORUS) available. You cannot use multiple types of

effects simultaneously.

Using send effects

You can send input channel or track signals to the send effects.

Channel signal send levels and pre/post selection are performed

on the Mixer screen. (See “Sending signals to internal/external

effects” on page 38.)

The return from this effect is sent to the stereo bus. In Bounce

mode, however, it is sent to the bounce bus. (See “Bouncing

tracks” on page 43.)

Editing send effects

The parameter editing is performed on the

EFFECT

screen.

Press the

EFFECT

button to open the

EFFECT

screen, and

while the Guitar Effect is displayed, press the

(

SEND

)

button

to switch to the Send Effect screen.

Press the

F3 (

SELECT

)

button to select the effect type

(REVERB, DELAY, CHORUS).

Use the

CURSOR

(

)

buttons to select the

parameter that you want to change, and then use the

JOG/

DATA

dial to select the value.

Calling the send effect library

On the Send Effect screen, press the

(

LIBRARY

) button

to display the library list.

Use the

JOG/DATA

dial to select the effect setting that you

want to call, and then press the

(

)

button.

The setting is called and the display returns to the Send

Effect screen.

Press the

F1 (

)

button to return to the Send Effect screen

without changing the parameter.

Saving send effects in the library

You can save an edited setting as a user setting in the library.

When the Send Effect screen is displayed, press the

(

LIBRARY

) button to display the PRESET/USER library list.

Use the

JOG/DATA

dial to select the USER area, and then

press the

(

SAVE

)

button.

NOTE

The library list contains a PRESET area and a USER area.

PRESET area data cannot be overwritten.

Enter a name if necessary.

Names of the PRESET library cannot be changed.