TASCAM DR-07X Reference Manual - Page 23
Setting the LEVEL MODE function from, the Quick menu, Adjusting the input level
View all TASCAM DR-07X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Setting the LEVEL MODE function from the Quick menu 1. Press the RECORD [0] button to begin recording standby. The REC indicator flashes red and the recording screen appears. 2. Press the QUICK button to open the quick menu. 4 - Recording Adjusting the input level 1. Press the RECORD [0] button to begin recording standby. The REC indicator flashes red and the recording screen appears. 3. Use the + or − button to select (highlight) LEVEL MODE, and press the 7 button. This opens the LEVEL MODE setting screen. 2. Use the . or / button to adjust the input level. Press the . or / button to show a pull-up MENU screen for input level setting. 4. Use the + or - button to change the LEVEL MODE setting to MANUAL. 5. Use the + or − button to select (highlight) a mode, and press the 7 button to enable the mode and return to the recording screen. The selected mode is shown with an icon on the recording screen. If the input is too high, the PEAK indicator on the upper left above the display lights. A 5 mark is provided at -12dB on the level meters. Set the input level so that the indicator bars fluctuate centered on this mark without causing the PEAK indicator to light red when the loudest sounds occur. NOTE ii Press the ¤ (HOME) [8] button to exit recording standby. ii When in recording standby or recording, the speaker will not output sound even if the I/O SETTING screen SPEAKER setting is on. If you need to monitor sound to adjust the input level and make recordings, connect the headphone to the /LINE OUT jack. Use the + or − button on the Home Screen to adjust the monitoring volume. This does not affect the sound to be recorded. TASCAM DR-07X 23