TASCAM IF-E100 CD-400U Network Settings Owners Manual - Page 9

Initializing page 1 Version This shows the CD-400U Network Settings version. 2 Search button Click this button to search for an IF-E100 on the network. 3 Settings tab Click this to open the Settings page. 4 Initializing tab This is the open page. 5 Firmware Version This shows the firmware version of the connected IF-E100. 6 IP Address This shows the IP address of the connected IF-E100. The IP address cannot be changed on the screen. 7 Close button Click this button to close CD-400U Network Settings. 8 Initialize button Click this button to initialize the settings of the IF-E100. Changing network settings Acquiring the IP address automatically Set the IP mode to "Auto (DHCP)" to acquire the IP address automatically. The default IP mode is "Auto (DHCP)". The IP mode will be Auto (DHCP) if a check mark (✓) is in the Auto (DHCP) or Static check box on the Settings page and the IP mode is shown as "Auto (DHCP)". NOTE A DHCP server is necessary to use with the IP mode sets to "Auto (DHCP)". If there is no check mark (✓) in the Auto (DHCP) or Static check box on the Settings page and the IP mode is shown as "Static", follow these procedures to change it to "Auto (DHCP)". 1. Click the Settings tab to open the Settings page. 2. Click the Network check box to put a check mark (✓) in it. 9 TASCAM CD-400U Network Settings