TASCAM US-2400 Owners Manual - Page 5

1 - Introduction Thank you for purchasing the TASCAM US-2400 professional DAW controller. It is designed to give you hands-on control of the most common tasks performed when mixing within a Digital Audio Workstation (DAW) environment. Its driverless design and support for common control surface protocols means that your new US-2400 can be set up for mixing in just a few minutes with minimal configuration. Unpacking the unit When you unpack the US-2400 you should find, in addition to this manual: About this manual Controls and indicators on the US-2400 are marked in this typeface: SOLO. Controls, messages, etc. on the computer screen are shown in this typeface: Press any key to continue. Copyright, etc. Windows and Windows XP are trademarks of Microsoft Corporation. Macintosh, MacOS and MacOS X are trademarks of Apple Computer. Please take some time to look through this manual and familiarize yourself with the US-2400's features and operation. We suggest you pay particular attention to the operational notes for your software application(s) of choice. You may also want to refer to your software's documentation in many cases, for a clear understanding of how certain features are integrated. Your experience with the US-2400 will be greatly enhanced by a good working knowledge of your audio software. • The unit itself • A 1.5m USB cable • AC power adapter and cable • Quick Start Guide • Warranty material Contact your TASCAM supplier if any of these items is missing. Any key on a computer keyboard is shown in square brackets, e.g. [Enter]. Mackie Control and HUI are registered trademarks or tradenames of LOUD Technologies Inc. All other trademarks are the property of their respective holders. TASCAM US-2400 Owner's Manual 5