TASCAM US-2x2 Owners Manual - Page 15
Analog outputs, Control input/output ratings, Audio performance, Computer system requirements, Windows
View all TASCAM US-2x2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Maximum input level: +20 dBu (7.75 Vrms) Gain range: 57 dB Analog outputs Line outputs (Balanced) US-2x2: LINE OUT 1-2 US-4x4: LINE OUT 1-4 Connectors: 6.3mm (1/4") standard TRS stereo jacks (Tip: HOT, Ring: COLD, Sleeve: GND) Output impedance: 110 Ω Rated output level: +4 dBu (1.273 Vrms) Maximum output level: +20 dBu (7.75 Vrms) Headphones output (PHONES) Connector: 6.3mm (1/4") standard stereo jack Maximum output US-2x2: 18 mW + 18 mW or higher (THD+N 0.1% or less, into 32 Ω load) US-4x4: 45 mW + 45 mW or higher (THD+N 0.1% or less, into 32 Ω load) ( 1 and 2 total) Control input/output ratings MIDI IN connector Connector: 5-pin DIN Format: standard MIDI MIDI OUT connector Connector: 5-pin DIN Format: standard MIDI USB Connector: 4-pin USB B-type Transfer rate: USB 2.0 High Speed (480 Mbps) Audio performance Mic preamp EIN (equivalent input noise) −127 dBu or less (150Ω termination with gain knob at MAX) Frequency response IN 1-4 to LINE OUT(BALANCED), PHONES 44.1 kHz, 48 kHz 20 Hz : +0 dB/−0.3 dB (JEITA) 20 kHz : +0 dB/−0.1 dB (JEITA) 20 kHz : +0 dB/−0.5 dB (PHONES output, JEITA) 88.2 kHz, 96 kHz 20 Hz : +0 dB/−0.3 dB (JEITA) 40 kHz : +0 dB/−0.2 dB (JEITA) 40 kHz : +0 dB/−2.0 dB (PHONESoutput, JEITA) S/N ratio 101 dB or more (MIC/LINE IN to LINE OUT, gain knob at MIN, JEITA) Distortion 0.003% or less (MIC/LINE IN to LINE OUT, 1 kHz sine wave, Rated input level, maximum output level, JEITA) Crosstalk 95 dB or more (MIC/LINE IN w LINE OUT, 1kHz, JEITA) Computer system requirements Check the TEAC Global Site (http://teac-global. com/) for the latest information about supported operating systems. Windows Supported operating systems Windows 10 32-bit Windows 10 64-bit Windows 8.1 32-bit Windows 8.1 64-bit Windows 7 32-bit SP1 or later Windows 7 64-bit SP1 or later (Windows 8, Windows Vista and Windows XP are not supported) Computer hardware requirements Windows computer with a USB 2.0 port CPU/processor speed 2 GHz or faster dual core processor (x86) Memory 2 GB or more 15 TASCAM US-2x2/US-4x4