TEAC 2488neo 2488neo Owner's Manual - Page 27
recording as you go. Press the, key when
View all TEAC 2488neo manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
4 − Recording 8 Use the cursor keys and the dial to move around the display and change values. The settings are shown as numbers and as a graph. Use the on-screen SW on the left side of the display (or use SHIFT and YES/ENTER to turn the EQ on, and use SHIFT and NO/EXIT to turn the EQ off) to compare the sound with and without the equalization. 11 To return to the zero position, where your song began, press and hold the STOP key, and press the REW key (marked as RTZ-"return to zero"). 12 When you've finished recording, press channel 1's REC key to save the track. 9 Press and hold down the RECORD key and press the PLAY key. The PLAY and RECORD indicators above the transport keys both light, and the REC key of track 1 lights solidly. If you want to rehearse while listening to a metronome click before recording, press the RHSL key to enter rehearsal mode before conducting the above operation. In rehearsal mode, if you press the PLAY key while pressing the RECORD key, a recording rehearsal starts and you can hear the metronome click without actually recording. 13 Press the CLICK key and the indicator goes out. 14 Press the PLAY key and listen to the recorded sound. To re-record press the REC key for track 1 again and repeat from step 9. 10 The metronome you set up earlier starts to play, and you can play your rhythm part along with it, recording as you go. Press the STOP key when you are finished. 27 TASCAM 2488neo