TEAC 2488neo 2488neo Owner's Manual - Page 84
USB export (virtual tracks), The WAVE IN/OUT menu screen appears.
View all TEAC 2488neo manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
10 − File import/export USB export (virtual tracks) This is basically the reverse of the import procedure. First, select a virtual track and then export its contents to the FAT partition before connecting the 2488neo to the computer and copying the file. 1 With the transport stopped, press MENU to open the MENU screen. 2 Select the WAVE IN/OUT and press YES/ENTER. The WAVE IN/OUT menu screen appears. 3 When USB EXPORT appears in inverse, press the YES/ENTER. 7 Press the YES/ENTER key. The audio data on the virtual track is converted to a WAV file and copied to the FAT partition. Press the NO/EXIT key to cancel export. 8 With the transport stopped, connect the 2488neo and a computer using USB (see "Opening the USB connection" on page 81). 9 Use the computer to copy the files from the 2488neo to the computer's hard disk. 10 Disconnect the 2488neo and the computer (see "Closing the USB connection" on page 81). A list of virtual tracks with recorded audio data appears. 4 Use the JOG/DATA dial (or §/¶ cursor keys) to select the virtual track for export, and press the INSERT key to put a check mark next to its name. You can export many virtual tracks at the same time by checking multiple virtual tracks for export. If you accidentally place a check mark next to a virtual track that you do not want to export, press the DELETE key to remove the check mark. 5 After selecting the virtual tracks for export, press the YES/ENTER key A pop-up message appears. 6 Select the final bit depth (RESOLUTION) of the exported files (16 or 24 bits). The file size of the exported data changes according to the bit depth. 84 TASCAM 2488neo