TEAC AGH600NT User Manual - Page 16

DAB Basic operations Setting up your DAB Tuner The first time you select DAB as the source, the unit will scan for DAB channels and build a channel list. Using the Channel List 1 Press the power switch to turn the unit on. 1 Select DAB by pressing the SOURCE button repeatedly. < When the system control functions are activated, always set this switch on, and turn the unit on/standby using the remote control unit. 2 Select DAB by pressing the SOURCE button repeatedly. < You can also use the BAND button on the remote control unit. The list of available channels is displayed. < If the channel list is not displayed, turn the MULTI JOG/ENTER knob or press the skip buttons (. // ) on the remote control unit. 2 Scroll through the channels in the channel list. Turn the MULTI JOG/ENTER knob. < You can also use the BAND button on the remote control unit. The unit will scan for ensembles broadcast in the local area and add them to the channel list as they are found. The scan should take about 20 seconds. Scanning... 209.93MHz 3 When you have found a channel that you want to listen to, press the ENTER button. After broadcast services have been found the channels are listed in alphanumeric order. < If no broadcast services are found, please check that the antenna is correctly connected to the unit. The channel is tuned in and channel information is displayed. 16