TEAC AGH600NT User Manual - Page 34
Specifications - model
View all TEAC AGH600NT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Sp ecif icat ions Amplifier Section Power output 75 W + 75 W (8 Ω, 1 kHz, JEITA) 90 W + 90 W (4 Ω, 1 kHz) Rated power output 60 W + 60 W (8 Ω, 1 kHz, 0.1 %) 75 W + 75 W (4 Ω, 1 kHz, 0.1 %) Total Harmonic Distortion 0.05 % (1 kHz, 8 Ω, 40 W) S/N Ratio PHONO: 70 dB (IHF-A/input short) AUX, CD: 100 dB (IHF-A/input short) TONE DIRECT: 110 dB (IHF-A/input short) Input Sensitivity/Impedance PHONO: 2.8 mV 10 kΩ AUX, CD: 180 mV 47 kΩ Frequency Response 10 Hz - 65 kHz (-3 dB) Tone Control BASS : ±12 dB (100 Hz) MID : ±12 dB (1 kHz) TREBLE : ±12 dB (10 kHz) FM Tuner Tuning range 87.50 - 108.00 MHz (50 kHz steps) Usable sensitivity 6 dBμ Harmonic distortion 0.8 % (Mono) 1.2 % (Stereo) Signal-to-Noise ratio 70 dB (Mono) 65 dB (Stereo) Stereo separation 35 dB (1 kHz) Preset stations 30 AM Tuner Tuning range 522 - 1629 kHz (9 kHz steps) Usable sensitivity 55 dBμ Harmonic distortion 1.5 % (at 74 dBμ) Signal-to-Noise ratio 45 dB (at 80 dBμ) Preset stations 30 DAB Tuner Tuning range Band 3, 174 MHz - 240 MHz Input 50 ohms, nominal Max signal 0 dBm typ Sensitivity 97 dBm typ Adjacent Channel Rejection 32 dB typ Preset stations 10 Internet Radio Format MP3, WMA, RealAudio Internet connection LAN terminal 10 BASE-T Wireless LAN IEEE 802.11b/g Security WEP, WPA, WPA2 General Power requirements AC 230 V, 50 Hz Power consumption 50 W (Standby: 0.7 W) Dimensions (W x H x D 290 x 102 x 338 mm Weight 6.8 kg Accessories Remote Control Unit (RC-1181) x 1 Batteries (AAA) x 2 AM loop antenna x 1 FM Lead-type antenna x 1 DAB antenna x 1 Wireless LAN antenna x 1 Power cord x 1 < Design and specifications are subject to change without notice. < Weight and dimensions are approximate. < Illustrations may differ slightly from production models. Information for Users on Collection and Disposal of Old Equipment and used Batteries These symbols on the products, packaging, and/or accompanying documents mean that used electrical and electronic products and batteries should not be mixed with general household waste. For proper treatment, recovery and recycling of old products and used batteries, please take them to applicable collection points, in accordance with your national legislation and the Directives 2002/96/EC and 2006/66/EC. By disposing of these products and batteries correctly, you will help to save valuable resources and prevent any potential negative effects on human health and the environment which could otherwise arise from inappropriate waste handling. For more information about collection and recycling of old products and batteries, please contact your local municipality, your waste disposal service or the point of sale where you purchased the items. Information on Disposal in other Countries outside the European Union These symbols are only valid in the European Union. If you wish to discard these items, please contact your local authorities or dealer and ask for the correct method of disposal. Note for the battery symbol (bottom right two symbol examples): This symbol might be used in combination with a chemical symbol. In this case it complies with the requirement set by the Directive for the chemical involved. Operating temperature 5˚C - +35˚C Operating humidity 5% - 85% (no condensation) Storage temperature 20˚C - +55˚C Pb 34