TEAC DP-24 DP-24 Owner's Manual - Page 17
Recording a vocal to TRACK 3
View all TEAC DP-24 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
3. Press the HOME button to return to the Home screen. 2 - Quick Guide Recording a vocal to TRACK 3 1. Press the ASSIGN button to open the Assign screen. 4. Press the REC button for TRACK 2. Its REC indicator blinks and the unit enters record standby. When you play the guitar, the input level is shown by the level meter for 2 (TRACK 2). 2. Use the CURSOR (5/b/g/t) buttons or press the SELECT button for TRACK 3 and align the cursor (frame) on the Assign screen with TRACK 3. Use the JOG/DATA dial or press the SOURCE button for INPUT B to set the recording source of the TRACK 3 to B. 5. Return to the beginning of the song (ZERO point) and start playback of the recorded rhythm guitar to play the lead guitar part along with the recording. Raise the fader for TRACK 2 to hear both the playback of TRACK 1 and input guitar signal through your headphones. 6. As necessary, use the faders for TRACK 1 and 2, PAN knobs, STEREO fader and MONITOR LEVEL knob to adjust the monitoring level and balance. 7. Return to the beginning of the song, press the RECORD (0) button to start recording, and play the lead guitar part. The RECORD (0) button lights red, and the REC indicator for TRACK 2 stops flashing and becomes lit. 8. After you finish your performance, press the STOP (8) button to stop recording. The recorded file is saved in the folder of the currently loaded song. 9. Press the REC button for TRACK 2 so the REC button becomes unlit. 3. Press the HOME button to return to the Home screen. 4. Press the REC button for TRACK 3. The REC indicator blinks and the unit enters record standby. 5. Use the TRIM knob for INPUT B to adjust the input level suitably for the mic. Set the TRIM knob so that the OL indicator for INPUT B does not light even when the loudest sound to be recorded is input. OL indicator 17 TASCAM DP-24