TEAC LP-P1000 Owner's Mamual - Page 56
Listening to a connected device, audio input jack AUX 2 IN with
View all TEAC LP-P1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
Listening to a connected device You can connect the audio output jack or headphones jack of a portable audio player or other device to this unit and listen to its audio playback through this unit. 1 Use the included stereo mini plug cable to connect the front panel analog audio input jack (AUX 2 IN) with the headphones jack (or audio output jack) of a portable audio player or other device. 3 Start playback on the playback device. Then, adjust the volume of both this unit and the connected device. ooIf the volume is not raised on an audio player when its headphones jack is connected to this unit, no sound will be output from this unit. ooIf you raise the volume level of the connected device too high, the sound might distort. If this occurs, lower the volume of the connected device until distortion stops and then adjust the volume on this unit. There are analog audio input jacks on both the front and rear panels. If cables are connected to both the front panel (AUX 2 IN) and the rear panel (AUX 1 IN) jacks, the audio input through the front panel jack (AUX 2 IN) will be used. If nothing is connected to the front panel jack (AUX 2 IN), the audio input through the rear panel jack (AUX 1 IN) will be used. 2 Press the PHONO/AUX button to select "AUX". 56