TEAC LP-R400 Owners Manual - Page 27
Messages, Specifications, Error Messages - owners manual
View all TEAC LP-R400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Messages Specifications ENGLISH 0 0:00 A blank CD-R/CD-RW disc is set on the tray. bUSY The unit is reading the disc. Wait a few seconds. CLOSE Close the disc tray. ErASE ** Erase the last track of the CD-RW disc. ErASE ALL Erase all the tracks of the CD-RW disc. FINAL Finalize the disc. -**db Increment level no dISC No readable disc has been loaded. OPEn Open the tray. The unit is reading the disc. P-** Program number UnFINAL Unfinalize the CD-RW disc. Error Messages dISCFULL, OPC FULL There is no space on the disc, or no more tracks are available. d dISC Discs designed for computer systems cannot be used for recording. Use the discs bearing "DIGITAL AUDIO" mark. P FULL 32 tracks have been programmed. No more tracks can be programmed. Err ** An error occurred within the unit. Press the POWER switch to turn the unit off, wait a minute, and turn it on again. Err 03 Something is wrong with the disc. Turn the unit off and on, and change the disc. (** is variable.) Amplifier Section Output power 3.5 W + 3.5 W Frequency response 50 Hz to 20 kHz Audio input sensitivity/Impedance . AUX: -6 dBV (0.5V)/20 kΩ Maximum iutput level AUX: +6 dBV (2.0V) CD Recorder Section Media type CD-RW and CD-R for Digital audio (record and playback) CD (playback only) Recording sampling frequency 44.1 kHz Frequency response 20 Hz to 20 kHz (playback: ±2 dB, recording: ±3 dB) Signal to noise ratio More than 80 dB (playback) More than 75 dB (recording) Total harmonic distortion Less than 0.1% (playback) Less than 0.12% (recording) Tuner Section Frequency range (FM 87.5 MHz to 108.0 MHz Frequency range (AM 530 kHz to 1,720 kHz Record Player Section Motor DC servo motor Drive system Belt Drive Speed 33-1/3 rpm, 45 rpm, 78 rpm Wow and Flutter less than 0.25% (WDT) Cartridge type Ceramic Stereo Cartridge Stylus STL-103 Output level 160 - 360 mV Speaker System Section Unit 70 mm (3") Impedance 4 ohms GENERAL Power requirements 120V, 60 Hz Power consumption 25 W Dimensions (W x H x D) . . . . 18 1/2" x 9 1/16" x 15 3/8" mm (470 x 230 x 390 mm) Weight 21 13/16 lbs (10 kg) Standard Accessories 45 RPM adaptor x 1 Remote control unit (RC-1157) x 1 Battery (AA, R6, SUM-3) x 2 AM antenna x 1 Stereo RCA pin cable x 1 Owner's manual x 1 Warranty card x 1 < Design and specifications are subject to change without notice. < Weight and dimensions are approximate. < Illustrations may differ slightly from production models. 27