TEAC PD-501HR Owner's Mamual - Page 31

PCM(192 kHz/24-bit) General Frequency range 20 Hz-80 kHz (JEITA) Power supply EN Model for Europe AC 220 - 240 V, 50 Hz S/N ratio 116 dB (JEITA, audible range) Model for USA/Canada AC 120 V, 60 Hz Distortion 0.0004% (JEITA, audible range) Power consumption 11 W Dynamic range 118 dB (JEITA, audible range) DSD Frequency range 20 Hz-80 kHz (JEITA) S/N ratio 116 dB (JEITA, audible range) Distortion 0.0005% (JEITA, audible range) Dynamic range 112 dB (JEITA, audible range) External dimensions 290 mm × 81.2 mm × 244 mm (11 3/8" x 3 1/4" x 9 5/8) (W × H × D including protrusions) Weight 4.2 kg (9 3/8 lb) Operating temperature range 5°C to +35°C Operating humidity range 5 - 85% (no condensation) Storage temperature range 20°C to +55°C Output Included accessories Analog output jacks (RCA) Output impedance 100 Ω Nominal output voltage level 0.32 Vrms RCA audio cable × 1 Power cord × 1 Digital output connector (COAXIAL) Output impedance 75 Ω Output level 0.5 Vp-p Remote control unit (RC-1306) × 1 Batteries for remote control unit (AAA) × 2 Digital output connector (OPTICAL) Owner's manual (this document) × 1 ooThe sampling frequency and bit rate used by the digital outputs (COAXIAL and OPTICAL) are the same as for the playback source. During DSD playback or CD/PCM playback in pure mode, however, nothing is output from the digital outputs. Warranty card × 1 ooSpecifications and appearance are subject to change without notice. ooWeight and dimensions are approximate. ooIllustrations in this owner's manual might differ slightly from production models. 31