TEAC RC-HS20PD RC-HS20PD Owners Manual - Page 6

2 - Names and Functions of Parts 0 LEVEL knob Use this to adjust the output level sent to the speaker or headphones connected to the PHONES jack. q ON LINE key/indicator Switch on line playback mode ON/OFF. Lights when ON, and is unlit when off. In order to use on line function, you must also set the HS-8. (See "Activating online playback mode" of "9 - Online functions" in the HS-8 Owner's Manual.) w STOP key/indicator Press to stop playback. When stopped, the indicator above it lights. e PAUSE key/indicator Press this key during playback or when stopped to put the unit in playback standby. This key lights when in standby. r PLAY key/indicator Press this key when stopped or during playback standby to start playback. During playback, the key lights. t 1-20 keys/indicators (flash playback keys) Press to play the take assigned to the corresponding key on the currently selected page of the Flash Start screen. Press a key that is lit to start playback of that take immediately (flash playback). Keys that are lit correspond to keys on the selected Flash Start screen that have flash-loaded takes. When takes are on the selected Flash Start screen, the corresponding key blinks rapidly during playback and blinks slowly during playback standby. y 0dB LOCK switch Engage this switch to prevent the fader from going above 0dB. u Fader Use this to adjust the sound output level. When the fader start function is ON, if you lower the fader completely (move it to the "∞" position), playback will pause to put the unit into playback standby. During playback standby, raising the fader above "∞" starts playback. Rear panel i REMOTE connector Use the included cable to connect this unit with an HS-8. CAUTION •• The REMOTE connector is not an Ethernet (LAN) connector. Never connect a cable that is connected to a network. •• Always turn the HS-8 unit power OFF before connecting or disconnecting a cable. Connecting a cable while the power is ON could cause damage. 6 TASCAM RC-HS20PD