TEAC SR-LX5i-S SR-LX5i Manual - Page 22
Troubleshooting, General, iPod Player, Tuner, Maintenance
View all TEAC SR-LX5i-S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Troubleshooting If you have problems with your system, look through this chart and see if you can solve the problem yourself before calling your dealer or TEAC service center. General No power. e Check the connection to the AC power supply. Check and make sure the AC source is not a switched outlet and that, if it is, the switch is turned on. Make sure there is power to the AC outlet by plugging another item such as a lamp or fan into the outlet. No sound from speakers. eSelect the source by pressing the FUNCTION button. e Adjust the volume. e Pull out the headphone's plug from the PHONES jack. e If the VOLUME indicator is blinking on the display, press the MUTING button. The sound is noisy. e The unit is too close to a TV or similar appliances. Install the unit apart from them, or turn them off. Remote control doesn't work. e Press the STANDBY/ON switch to turn the unit on. e If the battery is exhausted, replace it with a new one. e Use remote control unit within the range (5 m) and point at the remote sensor on the front panel. e Clear obstacles between the remote control unit and the main unit. e If a strong light is near the unit, turn it off. 22 iPod Player Cannot insert the iPod. e Check the dock adapter. e Remove dust or obstacles from the Dock connector of the SR-LX5i and the iPod, and insert the iPod again. Will not play. e Remove the iPod from the dock, wait a few seconds, and insert it again. e To view video on a connected TV set, press the VIDEO OUT button to turn on the VIDEO indicator. eSoftware update may solve the problem. Visit the Apple website and download the latest iPod Software. Cannot operate the iPod. e Set off the HOLD switch of the iPod. Tuner Cannot listen to any station, or signal is too weak. e Tune in the station properly. e Rotate the FM or the AM antenna until you get stations clearly. eConnect the supplied AM loop antenna. If normal operation cannot be recovered, unplug the power cord from the outlet and plug it again. Maintenance If the surface of the unit gets dirty, wipe with a soft cloth or use a diluted mild liquid soap. Be sure to remove any excess liquid completely. Do not use thinner, benzine or alcohol as they may damage the surface of the unit. Allow the surface of the unit to dry completely before using.