TEAC UD-701N Owners Manual English Francais Espanol - Page 17
Playback format information screen, Volume display, FIXED
View all TEAC UD-701N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Playback format information screen Press the INFO button on the remote control during playback to show playback format information. oo The input signal and playback signal displays will be the same when the upconversion setting is "OFF". Example when the playback source is USB, COAX1, COAX2, OPT1 or OPT2 (using 8× Fs upconversion) Input signal format Playback signal format PCM 44. 1kHz PCM 352.8kHz Input signal sampling frequency Playback sampling frequency Example when the playback source is NET or Bluetooth (using 4× Fs upconversion) Codec Playback signal format LDAC 48kHz PCM 192kHz Input signal sampling frequency Playback sampling frequency Volume display Two types of volume can be shown: STEP and dB. This is set by the VOLUME TYPE setting (page 24). The volume setting shown will be enlarged when you turn this unit's VOLUME knob. VOLUME TYPE set to "STEP (0-100)" Display example VOL. 36 The maximum volume level is 100 and the minimum level is 0. Before connecting headphones, set the VOLUME knob to its minimum value (0). Failure to do so might cause sudden loud noises, which could damage headphones, harm hearing or result in other trouble. VOLUME TYPE set to "dB" Display example -62 VOL. .0dB The maximum volume level is +24 dB and the minimum level is −∞ dB (negative infinity). Before connecting headphones, set the VOLUME knob to its minimum value (−∞ dB). Failure to do so might cause sudden loud noises, which could damage headphones, harm hearing or result in other trouble. The set output level is shown when LINE OUT LEVEL is set to "FIXED 0dB" or "FIXED +6dB". Example when VOLUME TYPE set to "dB" EN USB + 0.0dB oo If VOLUME TYPE is set to "STEP (0-100)", "VOL. 86" will be shown when set to "FIXED 0dB" and "VOL. 90" will be shown when set to "FIXED +6dB". When LINE OUT LEVEL is set to "OFF", "VOL. 0" or "−∞ dB" will be shown. Example when VOLUME TYPE set to "dB" USB − ∞ dB When LINE OUT LEVEL is set to FIXED or OFF Turning the VOLUME knob will cause the following to be displayed. LINE OUT LEVEL set to FIXED VOL. LINE OUT LEVEL set to OFF FIXED VOL. OFF 17