TP-Link 3.75G MA180 V2 Quick Install Guide 7106503935 - Page 1

Quick Installation Guide 3.75G HSUPA USB Adapter MODEL NO. MA180 2 LED Explanation LED Status Indication Flashing Red No SIM/USIM card is inserted. Solid Red The Adapter is initializing. Flashing Green The SIM/USIM card has registered to the network. Solid Green The network is available with a successful Internet connection. 7106503935 Package Contents 1 Hardware Installation SIM/USIM Card 3.75G HSUPA USB Adapter MA180 MODEL NO. MA180 QIG System Requirement Operating System͇ḤWindows 7/Vista/XP 32/64-bit CPU: 500MHz Pentium or above Hard Disk: 20G or above RAM: 128M or above Micro SD Card 1 2 3 4 1 Open the cover. 2 Insert the SIM/USIM card and the Micro SD card in the direction indicated on the Adapter. A Micro SD card is an optional accessory. You need to buy one yourself. To remove the Micro SD card, press it to eject it from the Adapter. 3 Replace the cover. 4 Plug the Adapter directly into the USB port on your computer̻ 3 Software Installation (The installation procedures in Windows 7/ Vista/ XP are similar. Here we use the procedures in Windows 7 as an example.) 1 The following window will automatically appear on your desktop. Click the Run AutoRun.exe. 3 Click Change to specify the destination you wish the application to be located or leave it in the default location. Click Next to continue. 5 The installation process may take 1~2 minutes. Please wait. 2 The InstallShield Wizard window will appear. Click Next to continue. 4 Click Install to begin the installation. 6 The following screen will then appear. Click Finish to complete the setup. After installation, the icon will appear on your desktop. Doubleclicking the icon can start the utility.