TP-Link Archer C20 Archer C20 V1 User Guide - Page 52
The Wi-Fi Protected Setup LED flashes for two minutes during the Wi-Fi Protected Setup
View all TP-Link Archer C20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
Archer C20 AC750 Wireless Dual Band Router Use this method if your client device has a WPS button. Step 1: Press the WPS/Reset button on the side panel of the router, as shown in Figure 4-18. You can also keep the default WPS status as Enabled and click the Add device button in Figure 4-17. Then choose "Press the WPS button of the new device within the next two minutes" and click Connect, shown in Figure 4-19. Figure 4-18 Figure 4-19 Add A New Device Step 2: Press and hold the WPS button of the client device. Step 3: The Wi-Fi Protected Setup LED flashes for two minutes during the Wi-Fi Protected Setup process. Step 4: When the WPS LED is on, the client device has successfully connected to the router. II. Enter the client device's PIN on the router Use this method if your client device does not have the WPS button, but has a Wi-Fi Protected Setup PIN number. Step 1: Keep the default WPS status as Enabled and click the Add device button in Figure 4-17, then Figure 4-20 will appear. - 40 -