TP-Link Archer C4000 Archer C4000US V3 User Guide - Page 13
Smart Device, minutes, Method 1: Wired, Method 2: Wirelessly
View all TP-Link Archer C4000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Chapter 2 3. Connect the modem to your router's Internet port with an Ethernet cable. 4. Turn on the modem, and then wait about 2 minutes for it to restart. 5. Connect the power adapter to the router and turn on the router. 6. Confirm that the following LEDs are on and solid to verify the hardware is connected correctly. Power On 2.4GHz On 5GHz-1 On 5GHz-2 On Internet On Note: • If all the LEDs are off, press the LED button for about 1 second, and then check the LEDs again. • If the 2.4GHz, 5GHz-1, and 5GHz-2 LEDs are off, press the Wi-Fi button for about 1 second and all the three LEDs should turn solid on. 7. Connect your computer to the router. • Method 1: Wired Turn off the Wi-Fi on your computer and connect the devices as shown below. Ethernet cable • Method 2: Wirelessly 1 ) Find the SSID (Network Name) and Wireless Password printed on the label at the bottom of the router. 2 ) Click the network icon of your computer or go to Wi-Fi Settings of your smart device, and then select the SSID to join the network. Computer Connections are available Wireless Network Connection TP-Link_XXXX TP-Link_XXXX_5G_1 TP-Link_XXXX_5G_2 Connect automatically Connect Smart Device < Settings Wi-Fi Wi-Fi CHOOSE A NETWORK... OR TP-Link_XXXX TP-Link_XXXX_5G_1 TP-Link_XXXX_5G_2 Other... 9