TP-Link Archer C4000 Archer C4000US V3 User Guide - Page 22
Set Up the Router as an Access Point, Advanced, Operation Mode, Access Point
View all TP-Link Archer C4000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Chapter 4 Note: It may take 1-2 minutes to make the settings valid. Set Up Internet Connection Tips: • If your internet connection type is BigPond Cable, please go to Advanced > Network > Internet to set your router. • If you use Dynamic IP and PPPoE and you are provided with any other parameters that are not required on the page, please go to Advanced > Network > Internet to complete the configuration. • If you still cannot access the internet, refer to the FAQ section for further instructions. 4. 3. Set Up the Router as an Access Point The router can work as an access point, transforming your existing wired network to a wireless one. 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to Advanced > Operation Mode, select Access Point and click Save. The router will reboot and switch to Access Point mode. 18