TP-Link Archer C5400X Archer C5400XUS V1 Quick Installation Guide - Page 1
TP-Link Archer C5400X Manual
View all TP-Link Archer C5400X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
Before You Start Turn off your modem, if any, and remove the backup battery if it has one. Hold the antennas from the base and push them fully into the slots. Connect the Hardware If your internet connection is through an Ethernet cable directly from the wall instead of through a DSL / Cable / Satellite modem, connect the Ethernet cable to the router's Internet port, and then follow steps 3 and 4 to complete the hardware connection. Configure the Router Method ONE: Via TP-Link Tether App 1. Download the Tether app. or Scan for Tether Tether Method TWO: Via a Web Browser 1. Connect your device to the router wirelessly or with an Ethernet cable. The default wireless network names (SSIDs) and password are printed on the label at the bottom of the router. 2. Tap the button in the Tether app and select Archer C5400X. Follow the steps to complete the setup and connect to the internet. SSID:TP-Link_XXXX SSID:TP-Link_XXXX_5G_1 SSID:TP-Link_XXXX_5G_2 Internet 1 Connect the modem to the router's Internet port with an Ethernet cable. 3 Connect the power adapter to the router and turn on the router. Choose your device type Router Range Extender Archer C5400X 2. Launch a web browser, and enter http://tplinkwifi.net or http://192.168.0.1 in the address bar. Create a password to log in. Note: If the login window does not appear, please refer to Q1 of Need Help? in this guide. http://tplinkwifi.net Password Confirm Password Let's Get Started 2 Turn on the modem, and then wait about 2 minutes for it to restart. 4 Verify the LED on the top is solid on (red or white) before moving on. 3. Follow the step-by-step instructions to set up the internet connection and register for the TP-Link Cloud service.