TP-Link Archer VR200 Archer VR200 V1 User Guide - Page 15
Method 1: Wired, Method 2: Wirelessly, Method 3: Use the WPS button - default password
View all TP-Link Archer VR200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Chapter 2 Connect the Hardware Power Adapter Modem Router Phone Jack 1 Connect the DSL splitter to the phone jack. DSL Splitter 2 Connect the modem router to the DSL splitter. 3 Turn on the modem router. Connect to the phone (Optional) 2. Connect your computer to the modem router. Method 1: Wired Connect your computer's Ethernet port to the LAN port on the modem router Archer VR200 via the Ethernet cable. Method 2: Wirelessly Use the default SSID (Wireless Network Name) and Wireless Password printed on the product label of the modem router to connect wirelessly. Method 3: Use the WPS button Wireless devices that support WPS, including Android phones, tablets, most USB network cards, can be connected to your router through this method. (WPS is not supported by IOS devices.) Note: The WPS function cannot be configured if the wireless function of the router is disabled. Also, the WPS function will be disabled if your wireless encryption is WEP. Please make sure the wireless function is enabled and is configured with the appropriate encryption before configuring the WPS. 1 ) Tab the WPS icon on the device's screen. 2 ) Immediately press the WPS button on your modem router. 11