TP-Link CPE520 CPE510 V1 UG - Page 33
MAC Address, Security Mode, Connected Station, Client, Root AP BSSID, TX Rate, Repeater
View all TP-Link CPE520 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Chapter 4 Status Tab AP MAC Address SSID Security Mode Connected Station Client WDS Root AP BSSID Root AP SSID TX Rate Displays whether the AP function is Enabled or Disabled. It is enabled in Access Point, Repeater, Bridge, AP Router and AP Client Router modes and disabled in Client mode by default. Displays the MAC address of AP interface or client interface. Displays the wireless network name (SSID). Displays the security mode you've chosen for your wireless network. There are three security modes: WPA-PSK, WPA and WEP. None means that no security mode is selected and all the hosts are allowed to access the wireless network. Displays the number of the connected stations. Displays whether the Client function is Enabled or Disabled. It is enabled in Client, Repeater, Bridge and AP Client Router modes and disabled in Access Point and AP Router modes by default. Displays whether the Wireless Distribution System (WDS) is enabled or not. Displays the basic service set identification (MAC address) of root AP. Displays the wireless network name of root AP. Displays the data rate at which the device transmits wireless packets. - 30 -