TP-Link N300 TD-W9977EU V1 Quick Installation Guide - Page 1

Quick Installation Guide N300 Wireless Gigabit VDSL/ADSL Modem Router TD-W9977 Connecting the Hardware If you don't need the phone service, just directly connect the modem router to the phone jack with a phone cable, then follow steps 3 and 4 to complete the hardware connection. Power Adapter Phone Jack 1 Connect the DSL splitter to the phone jack Modem Router LINE 2 Connect the modem router to MODEM PHONE the DSL splitter. DSL Splitter Connect to the phone (Optional) 3 Connect the power adapter to the modem router and push in to turn on the modem router. 4 Verify that the hardware connection is correct by checking these LEDs. Power On DSL On Wireless On Notes: 1. The DSL LED takes about 1 to 2 minutes to stabilize. 2. If the Wireless LED is off, please press the Wi-Fi button on the rear panel, then the LED should turn on in a few seconds.