TP-Link RE205 RE205EU V1 Quick Installation Guide - Page 2

Option TWO Quick Setup Using the WPS Button WPS is an easier way to extend your host network. You are recommended to use this way if your host router has a WPS button. The button might look like one of these: . Otherwise, please use Option ONE. 1 Power on Plug the extender into a power outlet near your router. 2 Connect 1 Press the WPS button on your router, and then press the WPS button on your extender within 2 minutes. Wait until the Power LED is solid on. The Signal LED should turn solid blue, indicating successful connection. If not, please use Option ONE. 2 If you are connecting the extender to a dual band router but only the 2.4GHz or 5GHz LED is on, repeat Step 1 to connect to the other band. 1. Some ISP gateways disable the WPS function by default. If the WPS method fails, please refer to Option ONE. 2. For more information about using WPS on your router, please refer to the router manufacturer's user guide. 3 Relocate 1 Plug in the extender about halfway between your router and the Wi-Fi dead zone. The location you choose must be within the range of the host network. 2 Wait until the Signal LED turns solid blue. If not, relocate it closer to the router to achieve better signal quality. Router Host Network Blue: Good location Red: Too far away Extended Network Clients Enjoy! Both extended networks share the same wireless network names (SSIDs) and passwords as those of your host networks. Entertainment Adapter The extender can be used as a wireless adapter to connect any Ethernet-only device such as a Blu-ray player, game console, DVR, or smart TV to your Wi-Fi network. First, connect the extender to your router using Option ONE or Option TWO. Then connect your Ethernet-only device to the extender via an Ethernet cable. Ethernet Connection Smart TV Game Console Desktop Router TP-Link Tether App Tether provides a simple, intuitive way to access and manage your extender with your iOS or Android devices. Set up the extender Modify wireless settings Tether Turn on/off the LEDs Block unwelcome devices How to begin? 1. Download the Tether app from the App Store or Google Play. 2. Ensure your device is wirelessly connected to the extender or to the host router. 3. Launch the app and start managing your extended network. Scan to download Q1. What should I do if I can't access the web management page of the extender? If your computer is wirelessly connected, make sure that you have connected to the extender's SSID; If your computer is connected via an Ethernet cable, make sure that the connection is stable. Make sure your computer is set to obtain an IP address and DNS server address automatically. Verify that http://tplinkrepeater.net or http://192.168.0.254 is correctly entered in the web browser and press Enter. Reset the extender and try again. Q2. How do I reset the extender? With the extender powered on, use a pin to press the RESET button. The LEDs should turn off momentarily, and then release the button. For technical support and other information, please visit http://www.tp-link.com/support Q3. Why doesn't the Signal LED turn solid blue (or red) after I completed Option ONE? You may have entered the incorrect Wi-Fi password of your host network during the configuration. Please log in to the extender's web management page to check the password and try again. Reset the extender and go through the configuration again. Q4. I enabled a wireless MAC filter, wireless access control, or access control list (ACL) on my router, what should I do before configuring and using the extender? If you have enabled those features of your host router, you may need to disable them first, and then follow Option ONE or Option TWO to complete the configuration. TP-Link hereby declares that this device is in compliance with the essential requirements and other relevant provisions of directives 2014/53/EU, 2009/125/EC and 2011/65/EU. The original EU declaration of conformity may be found at http://www.tp-link.com/en/ce. ©2017 TP-Link