TP-Link RE360 RE360EU V1 User Guide - Page 6
LED Explanation, 1. 2. 2. Port and Button Description, Status, Indication, Ports or Buttons - reset
View all TP-Link RE360 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
Chapter 1 Get to Know About Your Extender 1. 2. 1. LED Explanation You can check the extender's working status by following the LED Explanation table. Name (Signal) 2.4GHz/5GHz Power Ethernet Status Indication Solid blue The extender is connected to your router's wireless network and is in a suitable location. Solid red The extender is experiencing poor signal strength. Try relocating it closer to your router. Flashing blue WPS connection is being established. Off No wireless connection is established. The extender is connected to the 2.4GHz/5GHz wireless On network of your host router. Off No wireless connection has been established. On The extender is on. Flashing The extender is starting up. Off The extender is off. On A powered-on device is connected to the Ethernet port. Off No powered-on device is connected to the Ethernet port. 1. 2. 2. Port and Button Description Ports or Buttons Description WPS Button Press the WPS button on your host router, and immediately press the WPS button on the extender. The Signal LED of the extender should change to solid blue, indicating successful WPS connection. Power Button Press the Power button to turn on or off the extender. LED Button Press the LED button to turn on or off all the LEDs. Reset (Hole) Use a pin to press and hold the Reset button until all the LEDs turn on momentarily to reset the extender. Ethernet Port Connect your Ethernet-only device to the Ethernet port of the extender to join the Wi-Fi network. 4