TP-Link T1500G-10PSTL-SG2210P T1500G-10PSUN V1 User Guide - Page 19
Status, Indication, Reset, 100/1000Mbps RJ45 Port and PoE Port, SFP Port, T1500G-8T
View all TP-Link T1500G-10PSTL-SG2210P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Name Status Indication On The remaining PoE power≤7W PoE MAX Flashing The remaining PoE power keeps ≤7W after this LED is on for 2 minutes. Off The remaining PoE power>7W Speed or PoE Green On Flashing Yellow On Flashing Off The port is supplying power normally. The supply power exceeds the corresponding port's maximum power. Overload or short circuit is detected. Power-on self-test has failed. No device is connected to the corresponding port. Green SPF1, SFP2 Yellow On Flashing On Flashing A 1000Mbps device is connected to the corresponding port, but no activity. Data is being transmitted or received. A 100Mbps device is connected to the corresponding port, but no activity. Data is being transmitted or received. Off No device is connected to the corresponding port. Reset Press this button for five seconds or above to reset the software setting back to factory default setting. 10/100/1000Mbps RJ45 Port and PoE Port Designed to connect to the device with a bandwidth of 10Mbps, 100Mbps or 1000Mbps. Each has a corresponding Speed or PoE LED. SFP Port Designed to install the SFP module. T1500G-10MPS features 2 SFP transceiver ports. T1500G-8T The front panel of T1500G-8T is shown as Figure 2-2. Figure 2-2 Front Panel of T1500G-8T 9