TP-Link T1600G-52PS TL-SG2452P T1600G-28PSTL-SG2424P V1 CLI Reference Guide - Page 122
System Configuration Commands
View all TP-Link T1600G-52PS TL-SG2452P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 122 highlights
Chapter 17 System Configuration Commands System Commands can be used to configure the System information and System IP, reboot and reset the switch, upgrade the switch system and other operations. 17.1 system-time manual Description The system-time manual command is used to configure the system time manually. Syntax system-time manual time Parameter time -- Set the date and time manually, MM/DD/YYYY-HH:MM:SS Command Mode Global Configuration Mode Example Configure the system mode as manual, and the time is 12/20/2010 17:30:35 T1600G-52TS(config)# system-time manual 12/20/2010-17:30:35 17.2 system-time ntp Description The system-time ntp command is used to configure the time zone and the IP address for the NTP Server. The switch will get UTC automatically if it has connected to an NTP Server. Syntax system-time ntp { timezone } { ntp-server } { backup-ntp-server } { fetching-rate } Parameter timezone -- Your local time-zone, and it ranges from UTC-12:00 to UTC+13:00. The detailed information that each time-zone means are displayed as follow: UTC-12:00 -- TimeZone for International Date Line West. UTC-11:00 -- TimeZone for Coordinated Universal Time-11. UTC-10:00 -- TimeZone for Hawaii. UTC-09:00 -- TimeZone for Alaska. 107