TP-Link TD-8610 User Guide - Page 9
Rear-panel, 4 Hardware installation procedures
View all TP-Link TD-8610 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
2.3 Rear-panel TD-8610/8610B External ADSL MODEM ¾ ON/OFF: Turn on/off the ADSL modem's power. ¾ Power (9VAC/0.8A input): please do not use any unknown power adaptor, otherwise that may cause damage to your ADSL MODEM. ¾ RESET (reset default): When the device is working, please press the reset button of the Modem, keep the reset button pressed down for more than five seconds and then wait for the router to reboot. ¾ LAN: Connect with your computer's NIC. ¾ LINE (WAN): Connect to the MODEM of Splitter or connect to the telephone line. 2.4 Hardware installation procedures First Step: Connect the MODEM of Splitter with the LINE port of the TD-8610/TD-8610B ADSL2+ MODEM by telephone line. While you need to use a telephone, please attach telephone line into the phone of Splitter. Second Step: Connect category 5 cable with RJ45 jacks to ADSL MODEM's LAN port and your computer's NIC. Third Step: Link power adapter into the power jack of ADSL MODEM. Please note the range of voltage of power adapter should be within AC 220~230V, 50Hz, which will make the MODEM under normal operation. Last Step: Check the line connection to see if everything is ready. Then power up. 4