TP-Link TD-8840T User Guide - Page 39
TD-8840T, Filter Type Selection, IP/MAC Filter Set Index, Interface, Direction
UPC - 845973060176
View all TP-Link TD-8840T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
TD-8840T ADSL2+ Modem Router User Guide Figure 4-28 ¾ Filter Type Selection: Select the filter type for the next configuration below. ¾ IP/MAC Filter Set Index: Select the Set index for the IP Filter entry. This index can match with six IP / MAC Filter Rule Indexes. ¾ Interface: Select the interface for the entry. ) Note: If select PVC0~PVC7 as a interface, the filter will match the IP traffic of WAN port with specified IPs (Source IP Address and Destination IP Address). If select LAN as a interface, the filter will match the IP traffic of LAN port with specified IPs. ¾ Direction: Select the direction for this IP Filter rule. There are three filtering directions: Both, Incoming, Outgoing. 34
TD-8840T
ADSL2+ Modem Router User Guide
34
Figure 4-28
¾
Filter Type Selection:
Select the filter type for the next configuration below.
¾
IP/MAC Filter Set Index:
Select the Set index for the IP Filter entry. This index can match
with six IP / MAC Filter Rule Indexes.
¾
Interface:
Select the interface for the entry.
)
Note:
If select PVC0~PVC7 as a interface, the filter will match the IP traffic of WAN port with specified
IPs (Source IP Address and Destination IP Address). If select LAN as a interface, the filter will
match the IP traffic of LAN port with specified IPs.
¾
Direction:
Select the direction for this IP Filter rule. There are three filtering directions: Both,
Incoming, Outgoing.