TP-Link TD-VG3631 TD-VG3631 V1 QIG 1711502041 - Page 2

Connect your telephone to the port labeled "PHONE 1~2" on the Modem Router with a telephone line. Connect your USB device to the USB port labled "USB 1~2" on the Modem Router. Note If you want to share files or use the USB Voice Mail function, please plug an external USB hard drive/USB flash disk into the USB port. To use the printer function, please connect a USB printer to the USB port. Note To use USB Voice Mail function, please make sure the free space of the plugged external USB hard drive/USB flash disk is more than 4MB. Plug the provided Power Adapter into the Power jack on the back of the Modem Router and the other end to a standard electrical wall socket. Power on all your network devices and then check to see if the LEDs of the Modem Router display normally as the diagram below describes. Power: Solid WLAN: Solid light light or flashing Line: Solid light or flashing ADSL: Solid LAN: Solid light light or flashing or flashing USB: Solid light or flashing Note If the LEDs display abnormally, please check to see if all the cable connectors (power adapter, phone line and Ethernet cable) are well connected to your device. With the phone line well connected, if the ADSL LED turns off after flashing, please contact your ISP to ensure that your Internet connection is active. 2