TP-Link TD-VG5612 TD-VG5612 V1 Quick Install Guide - Page 2

Method 2 Via CD Setup Wizard (For Windows users only) Note: Mac OS X and Linux users, please follow Method 1 to configure the modem router. 1 Insert the TP-LINK Resource CD into the CD-ROM drive. 2 Choose your language and select TD-VG5612. Then click Start Setup.The Easy Setup Assistant will guide you through the setup process. Note: If the main page does not display on your computer, browse the files on the CD and double click Autorun.exe. TD-VG5612 Start Setup User Guide Choose your language: English Browse CD EXIT 3 Click FINISH to complete the setup. Welcome Install Your Device Configure Your Device Confirm Settings Congratulations! FINISH Enjoy! Now your wired and wireless devices can connect to the Internet ! USB Features The USB port can be used for media sharing, storage sharing and voice mail. You can also set up the FTP server to access your files remotely by connecting to the Internet. Note: To learn more about the USB features, please visit http://tp-link.com/app/usb, retrieve Resource CD or simply scan the QR code. USB sharing port Remote Access via FTP Server Media Sharing Local Storage Sharing Frequently Asked Questions (FAQ) Q1. What can I do if the login window does not appear? A1. If the computer is set to a static or fixed IP address, change it to obtain an IP address automatically. A2. Verify http://tplinkmodem.net or http://192.168.1.1 is correctly entered in the web browser and press Enter. A3. Use another web browser and try again. A4. Reboot your modem router and try again. A5. Disable the network adapter used currently then enable it again. Q2. What can I do if I cannot access the Internet? A1. Check your cables and make sure they are all plugged in correctly, including the telephone line, Ethernet cable and power adapter. A2. Check to see if you can log on to the Web-Management page of the modem router. The default address of the Web-Management page is http://tplinkmodem.net or 192.168.1.1. If you can, try the following steps. (If you can not, please set your computer to obtain an IP address automatically and then try to access the Internet again.) A3. Consult your ISP and make sure all the VPI/VCI, Connection Type, account username and password are correct. If they are not, please replace them with the correct settings and try again. A4. If you still cannot access the Internet, please restore your modem router to its factory default settings and reconfigure your modem router following the instructions in this QIG. A5. Please contact our Technical Support if the problem still exists. Q3. How do I restore the modem router to its factory default settings? A1. With the modem router powered on, press and hold down the RESET Button on the rear panel of the modem router for approximately 5 seconds. A2. Log into the Web Management page of the modem router, and go to System Tools->Factory Defaults, click Restore, then wait until the progress bar loading finished. RESET Button Press & Hold for 5 seconds Q4. What can I do if I forget my password? Web Management page password: Restore the modem router to its factory default settings and then use the default Username 'admin' and Password 'admin' to log in. Wireless Network password: A1. The factory default password can be found on the product label printed on the bottom of the modem router. A2. If you have changed your password, log into the modem router's Web Management page, go to Wireless->Wireless Security to obtain or reset your password. LED Indicators Name Power DSL Internet Wi-Fi VoIP1/ VoIP2 WPS LAN (1-4) USB 3G Status On Off On Flash Off On Off On Off On Off On/Off Flash On Off On Flash Off On Flash Off Indication System initialization complete. Power is off. DSL line is synchronized and ready to use. The DSL negotiation is in progress. There is no connection to the DSL Port or DSL synchronization fails. Internet connection is available. No Internet connection or the modem router is operating in Bridge mode. The wireless function is working properly. The wireless function is disabled. The corresponding phone is off-hook. The corresponding phone is on-hook Turns On when a WPS synchronization is established and automatically turns Off about five minutes later. A wireless device is trying to connect to the network via WPS. This process may take up to 2 minutes. The corresponding LAN Port is connected. The corresponding LAN Port is not connected. The inserted USB device is identified and ready to use. A new USB device is being identified. No USB device is plugged into the USB port. 3G Internet is successfully connected. The modem router is connecting to the 3G Internet. 3G Internet is not connected or the modem router is operating in other modes. ©2015 TP-LINK