TP-Link TL-ER604W TL-ER604W V1 QIG 7106504096 - Page 1

Package Contents Quick Installation Guide Wireless N Gigabit Broadband VPN Router TL-ER604W MODEL NO. TL-ER604W Ethernet Cable Power Cord Wireless N Gigabit Broadband VPN Router Resource CD MODEL NO. TL-ER604W QIG The provided power cord may differ from the figure above due to local power specifications. 2 Hardware Connection 1 Connect the WAN port of the Router to the Cable or DSL Modem via Ethernet cable. Here we take the ADSL Modem from TP-LINK as an example. 2 Connect a LAN port of the Router to the computer by Ethernet cable. Wall Socket 3 Connect one end of the AC power cord to the AC power socket on the Router, and the other end into an electrical outlet. The Router will work automatically and the LED will display as the LED Descriptions shown. 1 Physical Description • Front Panel • Back Panel • LED Descriptions Name PWR SYS WLAN WAN, LAN Status On (Green) O Flashing (Green) On/O On (Green) O Flashing (Green) On (Green/Yellow) Flashing (Green/Yellow) O Indication The Router is powered on The Router is powered o The Router works properly The Router has a hardware error The Wireless function is enabled The Wireless function is disabled There is data being transferred through wireless There is a device linked to the corresponding port but not active (Green light indicates the linked device is running at 1000Mbps, and yellow indicates the linked device is running at 10/100Mbps.) The corresponding port is transmitting or receiving data (Green light indicates the linked device is running at 1000Mbps, and yellow indicates the linked device is running at 10/100Mbps.) There is no device linked to the corresponding port 3 PC Con guration Here we take Wireless Network Connection as an example. Please make sure your PC supports wireless connection. You can also go to Local Area Connection to configure the PC for wired network connection, and then go to Step 5 to configure the router. 1 For Windows XP/2000 : Go to Start Control Panel Network Connections. Right click Wireless Network Connection, and select Properties. 2 Select "Internet Protocol (TCP/I"P) "/"Internet Protocol Version 4 (TCP/IPv4)" and click " Properties". 7106504096 REV1.0.0 3 2 TD-8816 1 Internet For Windows Vista/7: Go to Start Control Panel View network status and tasks Manage network connection. Right click Wireless Network Connection, and select Properties. For Windows XP/2000 For Windows 7/Vista 3 Select "Obtain an IP address automatically " and "Obtain DNS server address automatically". Then click "OK". For Windows XP/2000 For Windows 7/Vista