TP-Link TL-MR3040 Quick Installation Guide
TP-Link TL-MR3040 Manual
 |
View all TP-Link TL-MR3040 manuals
Add to My Manuals
Save this manual to your list of manuals |
TP-Link TL-MR3040 manual content summary:
- TP-Link TL-MR3040 | Quick Installation Guide - Page 1
Connecting the Device 3G Router Mode (Default) In this mode, the TL-MR3040 is connected to a 3G USB modem and wirelessly share the 3G mobile connection to multiple users. WISP Client Router Mode In this mode, the TL-MR3040 is wirelessly connected to the WISP(Wireless Internet Service Provider) and - TP-Link TL-MR3040 | Quick Installation Guide - Page 2
your 3G modem/card is on our Compatibility List: http://www.tp-link.com/common/?3g (2) If your 3G modem/card is on our list but the router shows "Unknown Modem", technical support. USB Modem? (1) Please insert a suited SIM/UIM card into the 3G modem/card correctly. (2) Please plug your 3G modem/card
-
1 -
2
 |
 |
7106503794
Quick Installation Guide
Portable 3G/3.75G Battery Powered Wireless N Router
MODEL NO.
TL-MR3040
Package Contents
QIG
Power Adapter
Resource CD
Ethernet Cable
USB Cable
TL-MR3040
System Requirement
The following operating systems are supported:
The following browsers are supported:
• Windows XP
• Windows Vista
• Windows 7
• Windows 98
• Windows 2000
• Windows 2003
• Windows Me
• Mac
• Internet Explorer
• FireFox
• Safari
Battery
Physical Description
1
Power Switch
Micro USB Port
3G USB Port
Ethernet Port
Power
Ethernet
WLAN
Internet
3G USB Port
Micro USB Port
Ethernet Port
This port is used to plug a 3G modem/card into.
Power Switch
This switch is used to power on the Router.
This port is used to be connected to the provided power adapter.
Item
Description
This Port can be used as either a LAN port or WAN port.
LED
Solid (Green)
The battery is full or the power supply is normal.
Description
Power
Ethernet
WLAN
Internet
Status
Solid (Orange)
The battery is being charged.
Solid (Red)
The battery power is low, you need to charge it.
Flashing
(Red)
The battery is abnormal.
Solid
The Ethernet port is connected, but there is no
data being transferred.
Flashing
The Ethernet port is transferring data.
Solid
Wireless is enabled.
Flashing
There is data being transferred through wireless.
Flashing
The Router is connected to the Internet and is
transferring data.
Reset Button
Reset Button
With the Router powered on, press and hold the Reset button
for at least 10 seconds , and then the Router will restore to the
default setting.
Hardware Connection
Connecting the Device
3G
Install the Battery
Lift and remove the rear
cover of the Router as the
shown.
Insert the battery as the
shown
and
press
the
battery until it snaps into
place.
Then
install
the
rear
cover.
3G Router Mode (Default)
WISP Client Router Mode
In Standard AP Mode, the TL-MR3040 also provides the other three sub modes: Repeater\Client\Bridge, please refer to the user guide on the Resource CD for
more details.
NOTE:
2
Travel Router (AP) Mode
Wireless Router Mode
1
2
• Chrome
In
this
mode,
the TL-MR3040
is
connected to
a
3G USB modem and
wirelessly
share
the
3G
mobile
connection to multiple users.
In this mode,
the TL-MR3040
is wirelessly
connected to the WISP(Wireless Internet
Service Provider) and share the Internet to
multiple users.
In this mode, the TL-MR3040 is connected to a DSL
or cable modem and works as a regular wireless
router so that multiple users can wirelessly share
the Internet. The Ethernet port on the TL-MR3040
works as a WAN port.
In this mode, the TL-MR3040
is connected
to a wired network and transforms the
wired Internet access into wireless so that
multiple users can share the Internet.
G
G
3
3
SSID: 123
Wired Network
Cable
Line
ADSL Modem
• iOS
• Linux
• Android
TL-MR3040.pdf
1
2012-2-20
11:26:35
NOTE:
Push the power
switch to the left to turn
on the Router.